相关论文: Superconducting Superstructure for the TESLA Colli…
During the initial phase of operation, the linacs of the Next Linear Collider (NLC) will contain roughly 5000 X-Band accelerator structures that will accelerate beams of electrons and positrons to 250 GeV. These structures will nominally…
The low energy part of the FAST linear accelerator based on 1.3 GHz superconducting RF cavities was successfully commissioned. During commissioning, beam based model dependent methods were used to correct linear lattice and trajectory.…
In this talk, I introduce the proposed next superconducting radio-frequency (SRF) technologies that will make it possible to achieve much higher accelerating electric field than the present SRF technologies. Audiences are assumed to be…
At the SASE-FEL user facilities FLASH and European XFEL, superconducting TESLA type cavities are used for acceleration of the driving electron bunches. The high achievable duty cycle allows for operating with long bunch trains, hence…
We study the electronic properties of a planar semiconductor-superconductor heterostructure, in which a thin ferromagnetic insulator layer lies in between and acts as a spin filtering barrier. We find that in such a system one can…
High energy photon colliders (gamma-gamma, gamma-electron) based on backward Compton scattering of laser light is a very natural addition to e+e- linear colliders. In this report we consider mainly this option for the TESLA project. Recent…
In order to fully exploit the physics potential of a future high energy e+e- linear collider, a Vertex Tracker, providing high resolution track reconstruction, is required. Hybrid Silicon pixel sensors are an attractive option, for the…
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency…
A novel concept of a high luminosity hadron collider is proposed. This would be a typical application of an induction synchrotron being newly developed. Extremely long bunches, referred to as superbunches, are generated by a multi- bunch…
Crab cavities have been proposed for a wide number of accelerators and interest in crab cavities has recently increased after the successful operation of a pair of crab cavities in KEK-B. In particular crab cavities are required for both…
The status of the design of a detector for the TESLA collider is presented.
Particle accelerators for high energy physics will generate TeV-scale particle beams in large, multi-Km size machines colliding high brightness beams at the interaction point [1-4]. The high luminosity in such machines is achieved by…
In order to update the beam power from 100 kW to 250 kW in China spallation neutron source (CSNS) Phase II, one of the important measures is to replace the 80 meters long beam transport line between the present 80 MeV linac injector and the…
Main parameters and physics search potential of gamma-p and gamma-A colliders, which will be available due to constructing the TESLA linear electron-positron collider tangentially to the HERA proton ring, are discussed.
A brief review of the SIESTA project is presented in the context of linear-scaling density-functional methods for electronic-structure calculations and molecular-dynamics simulations of systems with a large number of atoms. Applications of…
Coupler RF kick due to the asymmetric structure caused by the coupler, is more likely to lead to emittance growth in the SHINE injector with low beam energy. The calculation of coupler RF kick and resulting emittance dilution has been…
Feedback systems are essential for stable operation of a linear collider, providing a cost-effective method for relaxing tight tolerances. In the Stanford Linear Collider (SLC), feedback controls beam parameters such as trajectory, energy,…
Simulations play a key role for inference in collider physics. We explore various approaches for enhancing the precision of simulations using machine learning, including interventions at the end of the simulation chain (reweighting), at the…
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency…
FLASH and the European XFEL are SASE-FEL user facilities, at which superconducting TESLA cavities are operated in a pulsed mode to accelerate long bunch-trains. Several cavities are powered by one klystron. While the low-level rf system is…