相关论文: Broadband radial discone antenna: Design, applicat…

Six-dimensional movable antenna (6DMA) is an emerging technology that is able to fully exploit the spatial variation of wireless channels by controlling the 3D positions and 3D rotations of distributed antennas/antenna surfaces at the…

We demonstrate the existence of a frequency band exhibiting acoustic transparency in 2D and 3D dense granular suspensions, enabling the transmission of a low-frequency ballistic wave excited by a high-frequency broadband ultrasound pulse.…

This paper describes wideband (1 GHz) base station diversity and coordinated multipoint (CoMP)-style large-scale measurements at 73 GHz in an urban microcell open square scenario in downtown Brooklyn, New York on the NYU campus. The…

Wise arrangement of antennas is critical in wireless cellular systems for both reduction of co-channel interference (CCI) and increase the quality of service (QoS). In this paper, a novel architecture for antenna arrangement in CDMA…

Beam tracking is an essential functionality of millimeter wave (mmWave, 30-100 GHz) and sub-terahertz (sub-THz, 100-300 GHz) 5G/6G systems. It operates by performing antenna sweeping at both base station (BS) and user equipment (UE) sides…

Modern communication systems will require antennas with adaptive functionality which are able to modify their performance based on the requirements of the channel. For example, mobile ad-hoc networks need directive antennas that are able to…

The use of base stations (BSs) and access points (APs) with a large number of antennas, called Massive MIMO (multiple-input multiple-output), is a key technology for increasing the capacity of 5G networks and beyond. While originally…

Slant-polarized Multi Input Multi Output (MIMO) antennas are able to improve the performance of mobile communication systems in terms of channel capacity. Especially, the implementation of MIMO configurations for automotive applications…

On the basis of suitable theoretical grounds, we study and propose Antennas for the generation, in Acoustics, of Non-Diffracting Beams of ultrasound. We start considering for instance a frequency of about 40 kHz, and foresee fair results…

Fifth-generation (5G) cellular systems are likely to operate in the centimeter-wave (3-30 GHz) and millimeter-wave (30-300 GHz) frequency bands, where a vast amount of underutilized bandwidth exists world-wide. To assist in the research and…

We present parameterized broadband spectral models valid at frequencies between 30-300 MHz for six bright radio sources selected from the 3C survey, spread in Right Ascension from 0-24 hours. For each source, data from the literature are…

Design of antennas for modern applications is a challenging task that combines cognition-driven development of topology intertwined with tuning of its parameters using rigorous numerical optimization. However, the process can be streamlined…

This paper presents an evaluation of the WiFi exposure levels inside the university in the 2.4 GHz frequency band. The selected environment is the typical scenario where WiFi exposure concerns have increased in the last years, since a…

We present graphic results with high-levels of abstraction to desribe the basic principles and rules of thumb for acoustic or phononic band-gap engineering. We use these rules for developing an improved machien mount for damping acoustic…

Millimeter-wave multi-input multi-output (mm-Wave MIMO) systems are one of the candidate schemes for 5G wireless standardization efforts. In this context, the main contributions of this article are three-fold. 1) We describe parallel sets…

Millimeter-wave links are of a line-of-sight nature. Hence, multiple-input multiple-output (MIMO) systems operating in the millimeter-wave band may not achieve full spatial diversity or multiplexing. In this paper, we utilize reconfigurable…

In the millimeter wave (30-300 GHz) and Terahertz (0.1-10 THz) frequency bands, high spreading loss and molecular absorption often limit the signal transmission distance and coverage range. In this paper, four directions to tackle the…

Wireless devices inherently have a non-uniform distribution of energy from their antenna or antennas. The shape that this forms is commonly called a radiation pattern or antenna pattern. We demonstrate that orientation can be estimated…

This report describes the design and proposal of a wireless link capable of broadcasting at 1 Gbps. For this application, isotropic antennas, 256 QAM modulation, and BER level less than 1e-5, without using error correction coding, were…

This paper presents the design, fabrication, and experimental validation of an origami-inspired reconfigurable antenna. The proposed antenna can operate as a monopole or an inverted-L antenna, by changing its configuration. Doing so changes…