相关论文: The CMS Tracker Readout Front End Driver

A pipeline CAMAC controller with PC/104-Plus single board computer has been developed. The architecture of the pipeline CAMAC controller is completely different from that of traditional CAMAC controller. The pipeline CAMAC controller…

A muon tracking system consisting of four 9cm x 10cm sized bulk Micromegas detectors with 128um amplification-gap and two 10cm x 10cm triple GEM detectors is foreseen for high-precision tracking of 140GeV muons at the H8 beamline at CERN…

Electron tracking based Compton imaging is a key technique to improve the sensitivity of Compton cameras by measuring the initial direction of recoiled electrons. To realize this technique in semiconductor Compton cameras, we propose a new…

The front-end electronics of silicon detectors are typically designed to ensure optimal noise performance for the expected input charge. A combination of preamplifiers and shaper circuits result in a nontrivial response of the front-end to…

Optical readout of GEM based devices by means of high granularity and low noise CMOS sensors allows to obtain very interesting tracking performance. Space resolution of the order of tens of $\mu$m were measured on the GEM plane along with…

The High-Luminosity LHC will put significant demands on trigger systems. To control trigger thresholds, the CMS Collaboration is designing a novel Level-1 track trigger. The Outer Tracker will use modules with pairs of sensor layers to read…

This paper presents a lidar-only state estimation and tracking framework, along with a roadside sensing unit for integration with existing urban infrastructure. Urban deployments demand scalable, real-time tracking solutions, yet…

A novel FPGA based online tracking algorithm for helix track reconstruction in a solenoidal field, developed for the PANDA spectrometer, is described. Employing the Straw Tube Tracker detector with 4636 straw tubes, the algorithm includes a…

The upgrade of the Resistive Plate Chamber (RPC) detector, in order to increase the detector rate capability and to be able to work efficiently in high rate environment, consists in the reduction of the operating voltage along with the…

With the rapid development of network protocol, TCP/IP has been widely applied in various OS systems because of its advantages of high-speed network transmission and standardization. Furthermore, TCP/IP has the functions of retransmission…

This work is proposing and exploring the use of multichannel readout electronics, already used in quality assurance for gain uniformity studies, to measure the uniformity of the induction gap in GEM based detectors. The measurement will…

Future experiments of nuclear and particle physics are moving towards the high luminosity regime, in order to access suppressed processes like rare B decays or exotic charmonium resonances. In this scenario, high rate capability is a key…

Many visual monitoring systems operate under strict communication constraints, where transmitting full-resolution images is impractical and often unnecessary. In such settings, visual data is often used for object presence, spatial…

We develop the vertex detector for the international linear collider (ILC) using the FPCCD (Fine Pixel CCD), whose pixel size is 5 x 5 um2. Together with the FPCCD sensor, a prototype of the readout ASIC was developed in 2008. The readout…

Neuromorphic vision processor is an electronic implementation of vision algorithm processor on semiconductor. To image the world, a low-power CMOS image sensor array is required in the vision processor. The image sensor array is typically…

We present the first single-input multiple-output (SIMO) receiver ASIC that jointly performs jammer mitigation, channel estimation, and data detection. The ASIC implements a recent algorithm called siMultaneous mitigAtion, Estimation, and…

We present a novel design and the test results of a 4-channel driver for an array of Vertical-Cavity Surface-Emitting Lasers (VCSELs). This ASIC, named cpVLAD and fabricated in a 65 nm CMOS technology, has on-chip charge pumps and is for…

With the High Luminosity LHC upgrades, incorporating tracking information into the CMS Level-1 trigger becomes necessary in order to maintain a manageable trigger rate and good trigger performance e.g. to retain thresholds for electroweak…

Detectors based on pixels with timing capabilities are gaining increasing importance in the last years. Next-to-come high-energy physics experiments at colliders require the use of time information in tracking, due to the expected levels of…

The inner silicon detector of the Compact Muon Solenoid experiment (CMS) at CERN's LHC consists of 16588 modules. Charged-particle tracks in the detector are used to improve the accuracy to which the position and orientation of the modules…