相关论文: Booster High-level RF Frequency Tracking Improveme…
CW magnetrons, developed for industrial heaters, but driven by an injection-locking signal were suggested to power Superconducting RF (SRF) cavities due to higher efficiency and lower cost of generated RF power per Watt than traditionally…
SRF cavity quality factors can be accurately measured using RF-power based techniques only when the cavity is very close to critically coupled. This limitation is from systematic errors driven by non-ideal RF components. When the cavity is…
In order to meet the needs of Fermilabs planned post-collider experimental program, the total proton throughput of the 8 GeV Booster accelerator must be nearly doubled within the next two years. A system of 48 ramped corrector magnets has…
In this paper, we delve into the issue of Quantum Synchronization in a driven two-level (qubit) system situated within a structured environment. Our findings have practical implications as we discover that adding a time-dependent periodic…
In electron storage rings, it is possible to increase the bunch length by applying phase modulation to the radio frequency accelerating field by choosing appropriate parameters for the modulation. Such a bunch lengthening effect improves…
Quantum state transfer in optical microcavities plays an important role in quantum information processing, and is essential in many optical devices, such as optical frequency converter and diode. Existing schemes are effective and realized…
A new beam injection scheme is proposed for the Fermilab Booster to increase beam brightness. The beam is injected on the deceleration part of the sinusoidal magnetic ramp and capture is started immediately after the injection. During the…
An experimental method is developed for the robust frequency stabilization using a high-finesse cavity when the laser exhibits large intermittent frequency jumps. This is accomplished by applying an additional slow feedback signal from…
A $Q$-enhancement strategy for racetrack microresonators is put forward. The design is based on the modification of the resonator geometry in order to mitigate the two main sources of radiation loss in the presence of curved waveguides: the…
It has been argued that current saturation in graphene field-effect transistors (GFETs) is needed to get the highest possible maximum oscillation frequency (fmax). This paper numerically investigates whether velocity saturation can help to…
A channel with continuous phase modulation and 1-bit ADC with oversampling is considered. Due to oversampling, higher-order modulations yield a higher achievable rate and this work presents a method to approach this with sophisticated…
Superconducting Radio Frequency (SRF) cavities are used in modern accelerators to efficiently accelerate particles. When cavity is supplied with pulsed RF field it undergoes a mechanical strain due to the Lorentz force. The resulting…
We report the relative frequency stabilization of a distributed feedback erbium-doped fiber laser on an optical cavity by serrodyne frequency shifting. A correction bandwidth of 2.3 MHz and a dynamic range of 220 MHz are achieved, which…
The Booster Operation Optimization Sequential Time-series for Regression (BOOSTR) dataset was created to provide a cycle-by-cycle time series of readings and settings from instruments and controllable devices of the Booster, Fermilab's…
The synchrotron motion simulator is invented to simulate the longitudinal motion for particles under RF (Radio Frequency) voltage field in a ring accelerator. It is especially used to study the efficiency of adiabatic capture for a booster…
The off-frequency detune method is being considered for application in the LCLS-II-HE superconducting linac to produce multi-energy electron beams for supporting multiple undulator lines simultaneously [1]. Design of the tuner has been…
FLASH plans to use a "third harmonic" (3.9GHz) superconducting cavity to compensate nonlinear distortions of the longitudinal phase space due to the sinusoidal curvature of the the cavity voltage of the TESLA 1.3GHz cavities. Higher order…
The interplay between large antenna apertures and high carrier frequencies in future wireless systems gives rise to near-field communications, where the curvature of spherical wavefronts renders traditional far-field beamforming models…
Tracking a randomly varying optical phase is a key task in metrology, with applications in optical communication. The best precision for optical phase tracking has till now been limited by the quantum vacuum fluctuations of coherent light.…
We demonstrate serrodyne frequency shifting of light from 200 MHz to 1.2 GHz with an efficiency of better than 60 percent. The frequency shift is imparted by an electro-optic phase modulator driven by a high-frequency, high-fidelity…