相关论文: Preliminary Considerations for the Design of the I…
Design of a muon collider interaction region (IR) presents a number of challenges arising from low {\beta} * < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect…
Design of a muon collider interaction region (IR) presents a number of challenges arising from low {\beta}* < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting…
An innovatory interaction region has been recently conceived and realized on the Frascati DA{\Phi}NE lepton collider. The concept of tight focusing and small crossing angle adopted to achieve high luminosity in multibunch collisions has…
An innovatory interaction region has been recently conceived and realized on the Frascati DA{\Phi}NE lepton collider. The concept of tight focusing and small crossing angle adopted until now to achieve high luminosity in multibunch…
An interaction region (IR) with head-on collisions is considered as an alternative to the baseline configuration of the International Linear Collider (ILC) which includes two IRs with finite crossing-angles (2 and 20 mrad). Although more…
An electron-proton/ion collider facility (eRHIC) is under consideration at Brookhaven National Laboratory (BNL). Such a new facility will require the design and construction of a new optimized detector profiting from the world's first ep…
The design of the region close to the interaction point of the FCC-ee experiments is especially challenging. The beams collide at an angle (+-15 mrad) in the high-field region of the detector solenoid. Moreover, the very low vertical…
The PEP-II interaction region is designed to accommodate asymmetric beam energies, head-on collisions, small bunch spacing and provide low beta* for high luminosity. Local correction schemes are implemented to compensate non-linear…
The possibility of two interaction regions (IRs) is a design requirement for the Electron Ion Collider (the EIC). There is also a significant interest from the nuclear physics community in a 2nd IR with measurements capabilities…
The PEP-II luminosity upgrade foreseen for the next years requires an increased number of bunches and lower beta-y* with minor modifications to the present Interaction Region (IR2). When increasing the collision frequency the beams…
Muon collider is a promising candidate for the next energy frontier machine. However, in order to obtain peak luminosity in the 1035/cm2/s range the collider lattice design must satisfy a number of stringent requirements, such as low beta…
ALICE (A Large Ion Collider Experiment) experiment at CERN LHC is designed to study the properties of the Quark-Gluon Plasma (QGP) in heavy-ion collisions. In 2019-2020 the upgrade of CERN LHC will increase the luminosity and the collision…
One of the key systems of a Muon Collider (MC) - seen as the most exciting option for the energy frontier machine in the post-LHC era - is its interaction region (IR). Designs of its optics, magnets and machine-detector interface are…
In order to aid in luminosity maximization at the interaction point (IP), the collision location $s_{IP}$ must be equivalent to the location of the minimum value of the beta function $s^*$. Accurate optics measurements and $s^*$ movements…
The guidelines for a phi-factory at very high luminosity are described. A preliminary design for a double ring collider, DAPHNE-II, is presented, fulfilling the requirements of luminosity of the order of 10^34 cm-2sec-1
DAFNE, the Frascati F-factory, has recently completed experimental runs for the three main detectors, KLOE, FINUDA and DEAR achieving 1.6x10E+32 cm-2s-1 peak and 10 pb-1 daily integrated luminosities. Improving these results by a…
The successful commissioning and operation of the PEP-II asymmetric e+e- collider motivated further studies to increase luminosity. In this paper, we discuss a modification of the PEP-II lattice to reduce the vertical beta function at the…
TESLA is designed as an electron-positron linear collider (LC) based on super-conducting technology. A second interaction region is forseen to be incorporated in the design allowing its possible operation as a photon collider. In this paper…
The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics…
The Supper Proton-Proton Collider is a next-generation hadron collider that is now being designed. A baseline design aims for a peak luminosity of about 1*10^35 cm^-2 s^-1. The focus of this article is the effect of beam-beam interactions…