相关论文: Status of the Control Sytem for the Front-End of t…

The large scientific projects present new technological challenges, such as the distributed control over a communication network. In particular, the middleware EPICS is the most extended communication standard in particle accelerators. The…

The architecture for Spallation Neutron Source accelerator physics application programs is presented. These high level applications involve processing and managing information from the diagnostic instruments, the machine control system,…

The European Spallation Source ESS is being constructed in Lund, Sweden, to be the world's brightest cold pulsed spallation neutron source. The facility uses a 2GeV proton beam hitting a target to produce neutrons. The neutrons are then…

The European Spallation Source (ESS), presently well on its way to completion, will soon provide the most intense neutron beams for multi-disciplinary science. Fortuitously, it will also generate the largest pulsed neutrino flux suitable…

The COHERENT collaboration's primary objective is to measure coherent elastic neutrino-nucleus scattering (CEvNS) using the unique, high-quality source of tens-of-MeV neutrinos provided by the Spallation Neutron Source (SNS) at Oak Ridge…

The Spallation Neutron Source (SNS) is a pulsed source of neutrons and, as a byproduct of this operation, an intense source of neutrinos via stopped-pion decay. The COHERENT collaboration uses this source to investigate coherent elastic…

The European Spallation Source (ESS) is the world's next generation spallation-based neutron source. The research conducted at ESS will yield in the discovery and development of new materials including the fields of manufacturing,…

Using neutrinos produced at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL), the COHERENT collaboration has studied the Pb($\nu_e$,X$n$) process with a lead neutrino-induced-neutron (NIN) detector. Data from this…

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) is being upgraded from 1.0 GeV to 1.3 GeV (or 1.4 to 2.8 MW). Several water-cooled magnets have been upgraded to transport 30% higher beam energy. Fermilab…

The European Spallation Source (ESS), currently finishing its construction, will soon provide the most intense neutron beams for multi-disciplinary science. At the same time, it will also produce a high-intensity neutrino flux with an…

Coherent elastic neutrino-nucleus scattering (CE$\nu$NS) is a dominant low-energy neutrino interaction that remains experimentally challenging due to its weak-scale cross section and the small nuclear recoil energies involved. This thesis…

Each accelerator control system has a variety of measurement devices. One of the most common types of instrument interfaces used for their control is a serial (RS-232) bus. It is inexpensive and adequate for relatively simple measurement…

The four LHC experiments at CERN have decided to use a commercial SCADA (Supervisory Control And Data Acquisition) product for the supervision of their DCS (Detector Control System). The selected SCADA, which is therefore used for the CMS…

After the first observation of coherent elastic neutrino-nucleus scattering (CE$\nu$NS) by the COHERENT collaboration, many efforts are being made to improve the measurement of this process, making it possible to constrain new physics in…

The recent detection of coherent elastic neutrino-nucleus scattering (CE$\nu$NS) opens the possibility to use neutrinos to explore physics beyond standard model, with small-size detectors. However, the CE$\nu$NS process generates signals at…

Despite recent progress in training spiking neural networks (SNNs) for classification, their application to continuous motor control remains limited. Here, we demonstrate that fully spiking architectures can be trained end-to-end to control…

Many large accelerator facilities have adopted the open-source EPICS software as the quasi-industry standard for control systems. They typically have access to their own electronics laboratory and dedicated personnel for control system…

Building the European Spallation Source (ESS), the most powerful neutron source in the world, requires significant technological advances at most fronts of instrument component design. Detectors are not an exception. The existing…

Integration of a new Knob-Box in the PSI Control Systems ACS and Epics. Operation of the PSI cyclotrons has always relied heavily on manual control. Tuning of our high intensity beams for minimum losses is an art still depending on personal…

The SRS is a 2GeV synchrotron light source with 14 beamlines serving approximately 34 experimental stations. Control of the major elements of the beamlines (vacuum pumps, gauges, valves and radiation stops) is the responsibility of the main…