相关论文: The Advanced Photon Source Injector Test Stand Con…

Avalanche photodiode (APD) has been intensively investigated as a promising candidate to replace photomultiplier tubes (PMT) for weak light detection. However, in conventional APDs, a large portion of carrier energy drawn from the electric…

Active Pixel Sensor (APS) technology has shown promise for next-generation vertex detectors. This paper discusses the design and testing of two generations of APS chips. Both are arrays of 128 by 128 pixels, each 20 by 20 micro-m. Each…

The CLIC Test Facility (CTF3) is an intermediate step to demonstrate the technical feasibility of the key concepts of the new RF power source for CLIC. CTF3 will use electron beams with an energy range adjustable from 170 MeV (3.5 A) to 380…

The Advanced Light Source (ALS) at LBNL is upgrading several LLRF systems for its Linac and Sub-Harmonic Bunchers, where it is desired to have a unified LLRF system design to support various RF frequencies (at 125MHz, 500MHz and 3GHz) and…

Avalanche photodiodes (APDs) are the semiconducting analogue of photomultiplier tubes offering very high internal current gain and fast response. APDs are interesting for a wide range of applications in communications1, laser ranging2,…

We describe the time- and position-dependent point spread function (PSF) variation of the Wide Field Channel (WFC) of the Advanced Camera for Surveys (ACS) with the principal component analysis (PCA) technique. The time-dependent change is…

A solid state device to discriminate all the four Bell states is proposed. The device is composed of controlled absorption crystals, rotators, and retarders. The controlled absorption, where the state of one photon affects the absorption of…

Recent advances in silicon photonics promise to revolutionize modern technology by improving performance of everyday devices in multiple fields. However, as the industry moves into a mass fabrication phase, the problem of effective testing…

Machine protection, as part of accelerator control systems, can be managed with a 'functional safety' approach, which takes into account product life cycle, processes, quality, industrial standards and cybersafety. This paper will discuss…

Active Stark Atomic Spectroscopy (ASAS) method can be used to determine a high electric field in the diode of an ion or electron accelerator as a function of position and time, including the positions of anode and cathode plasma emission…

The Intense Pulsed Neutron Source has been an operating user facility for more than 20 years. Development of an upgrade for the data acquisition system has been in progress for some time now. Now that the initial installation on the test…

Results from the photon multiplicity measurements using a fine granularity preshower photon multiplicity detector (PMD) at CERN SPS are discussed. These include study of pseudo-rapidity distributions of photons, scaling of photon…

This paper presents a comprehensive technical overview of the Linac Coherent Light Source II (LCLS-II) photoinjector laser system, its first and foremost component. The LCLS-II photoinjector laser system serves as an upgrade to the original…

Atomic force microscopes have proved to be fundamental research tools in many situations where a gentle imaging process is required, and in a variety of environmental conditions, such as the study of biological samples. Among the possible…

High-intensity positron sources are critical for next-generation electron-positron colliders, where positron beam quality and characteristics directly impact the luminosity. Accurate modeling and validated simulation tools for positron…

High luminosity in DAFNE needs very high electron and positron currents stored. A full energy (510 MeV) injection system composed by a full energy electron and positron linac and an accumulator-damping ring is presently used. The electron…

On-line monitoring of beam quality for high brightness beams is only possible using non-invasive instruments. For matching measurements, very few such instruments are available. One candidate is a quadrupole pick-up. Therefore, a new type…

We have written an automatic image processing pipeline for the Advanced Camera for Surveys (ACS) Guaranteed Time Observation (GTO) program. The pipeline, known as Apsis, supports the different cameras available on the ACS instrument and is…

The Storage Ring at the Advanced Light Source is capable of being filled in selectable buckets. Typically, 276 consecutive buckets out of 328 possible are selected. It has been found that the amount of charge injected is not uniform…

The High Energy Photon Source (HEPS), is the first fourth-generation storage ring light source being built in the suburb of Beijing, China. The storage ring was designed with the emittance lower than 60 pm.rad with a circumference of 1.36…