相关论文: Upgrade of the Control System of the IFUNAM's Pell…

We outline a strategy for next-generation neutrino physics experiments based on beams from accelerators in North America. This strategy is based on the mounting evidence in favor of the large mixing angle solution to solar neutrino problem,…

Measurement of high-power proton beam-halo formation is the ongoing scientific experiment for the Low Energy Demonstration Accelerator (LEDA) facility. To attain this measurement goal, a 52-magnet beam line containing several types of beam…

In the context of the general consolidation of the CERN ISOLDE facility, a project has been started to upgrade the ISOLDE control system. We describe the new ISOLDE control system, emphasizing the systematic use of industrial components…

The optical fibres that transmit the beam permit loop signals at the CERN accelerator complex are deployed along radiation areas. This may result in increased attenuation of the fibres, which reduces the power margin of the links. In…

Soft robotics technologies have gained growing interest in recent years, which allows various applications from manufacturing to human-robot interaction. Pneumatic artificial muscle (PAM), a typical soft actuator, has been widely applied to…

At the end of the Large Hadron Collider's Run 2, CERN's Proton Injector Linac 2, commissioned in 1978, delivered its final beam in December 2018. For Run 3, from March 2021, a new H$^{-}$ will take over the role: Linac4. The machine has…

The HICAT project is a Heavy Ion accelerator for light ion Cancer Treatment to be built for the clinics in Heidelberg, Germany. It consists of a 7 MeV/u linac, a compact synchrotron and three treatment places, one of them equipped with a…

Many large accelerator facilities have adopted the open-source EPICS software as the quasi-industry standard for control systems. They typically have access to their own electronics laboratory and dedicated personnel for control system…

Magnet power supplies in the PSI accelerator complex with their control and field-bus are old. Some components are more then 30 years old. To guarantee further maintenance and to meet the more demanding specifications for operation with the…

First Experiences Integrating PC Distributed I/O Into Argonne's ATLAS Control System The roots of ATLAS (Argonne Tandem-Linac Accelerator System) date back to the early 1960s. Located at the Argonne National Laboratory, the accelerator has…

The beam diagnostic system of U-70 beam transfer lines (beam profiles, intensity and beam losses measurements) was designed in the beginning of 80-th on the base of 8-bit microprocessor, SUMMA hardware and home made serial communication…

In the framework of the LHC Injectors Upgrade project, the CERN Proton Synchrotron underwent hardware changes during the Long Shutdown 2. These changes required an update of the CERN Proton Synchrotron impedance model and an assessment of…

In current accelerators, numerous parameters and monitored values are to be adjusted and evaluated, respectively. In addition, fine adjustments are required to achieve the target performance. Therefore, the conventional…

The paper describes a new CNC control unit for machining centres with learning ability and automatic intelligent generating of NC programs on the bases of a neural network, which is built-in into a CNC unit as special device. The device…

The KEK 8-GeV electron / 3.5-GeV positron linac has been operated with very different beam specifications for downstream rings, KEKB, PF and PF-AR. For the reliable operation among these beam modes intelligent beam switching and beam…

The Advanced Light Source was commissioned 10 years ago using the newly constructed control system. Further experience with the control system was reported in 1993. In this publication, we report on recent experience with the operation and…

Synchrotron radiation has been used for many years as a beam diagnostic at electron accelerators. It is not normally associated with proton accelerators as the intensity of the radiation is too weak to make detection practical. However, if…

The use of non-invasive sensors & systems to measure particle beam characteristics is a crucial part of modern accelerator control systems due to their ability to return real time passive measurements without impacting the beam quality.…

The Indiana University Cyclotron Facility (IUCF) is in the process of building the Midwest Proton Radiation Institute (MPRI). This involves refurbishing the 200MeV cyclotron and building new facilities for the purpose of providing clinical…

The CERN accelerator complex prepares protons for the four big experiments at the Interaction Regions of the Large Hadron Collider (LHC) as well as for a number of fixed target experiments, which take beam directly from the LHC injectors.…