相关论文: The LIGO Interferometer Sensing and Control System
The LIGO Control and Data system (CDS) features a tightly coupled and highly integrated control and data acquisition system. Control of the interferometers requires many Multiple Input Multiple Output (MIMO) control loops closed both…
The original LIGO suspension control system [1] used analog circuitry to implement the closed loop damping required for local control of each the suspended optics. Recent developments in analog to digital converters (ADC), digital to analog…
We describe the angular sensing and control of the 4 km detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO). The culmination of first generation LIGO detectors, Enhanced LIGO operated between 2009 and 2010 with about…
To meet the strain sensitivity requirements [1], [2] of the Laser Interferometer Gravitational Wave Observatory (LIGO), the laser frequency and amplitude noise must initially be reduced by a factor of 1000 in the pre-stabilized portion of…
The next sixth generation (6G) networks are envisioned to integrate sensing and communications in a single system, thus greatly improving spectrum utilization and reducing hardware costs. Low earth orbit (LEO) satellite communications…
A novel multistatic multiple-input multiple-output (MIMO) integrated sensing and communication (ISAC) system in cellular networks is proposed. It can make use of widespread base stations (BSs) to perform cooperative sensing in wide area.…
Interferometric gravitational wave antennas are based on Michelson interferometers whose sensitivity to small differential length changes has been enhanced by adding multiple coupled optical resonators. The use of optical cavities is…
In this paper, we study the Integrated Communication and Control (ICAC) problem. Specifically, we investigate how messages can be transmitted from the controller/encoder to the observer/decoder through the control signal in Multiple-Input…
Integrated sensing and communications (ISAC), which is recognized as a key enabler for sixth generation (6G), has brought new opportunities for intelligent, sustainable, and connected wireless networks. Multiple-input multiple-output (MIMO)…
The French-Italian interferometric gravitational wave detector VIRGO is currently being commissioned. Its principal instrument is a Michelson laser interferometer with 3 km long optical cavities in the arms and a power-recycling mirror. The…
The LIGO experiment aims to detect and study gravitational waves using ground based laser interferometry. A critical factor to the performance of the interferometers, and a major consideration in the design of possible future upgrades, is…
A near-field integrated sensing and communications (ISAC) framework is proposed, which introduces an additional distance dimension for both sensing and communications compared to the conventional far-field system. In particular, the…
Regulatory limits on Maximum Permissible Exposure (MPE) require handheld devices to reduce transmit power when operated near the user's body. Current proximity sensors provide only binary detection, triggering conservative power back-off…
Laser interferometers with high circulating power and suspended optics, such as the LIGO gravitational wave detectors, experience an optomechanical coupling effect known as a parametric instability: the runaway excitation of a mechanical…
Integrated sensing and communications (ISAC) has attracted tremendous attention for the future 6G wireless communication systems. To improve the transmission rates and sensing accuracy, massive multi-input multi-output (MIMO) technique is…
To support the unprecedented growth of the Internet of Things (IoT) applications, tremendous data need to be collected by the IoT devices and delivered to the server for further computation. By utilizing the same signals for both radar…
This is an overview of the adaptive optics used in Advanced LIGO (aLIGO), known as the thermal compensation system (TCS). The thermal compensation system was designed to minimize thermally-induced spatial distortions in the interferometer…
New generations of gravity wave detectors require unprecedented levels of vibration isolation. This paper presents the final design of the vibration isolation and positioning platform used in Advanced LIGO to support the interferometers…
The Advanced LIGO gravitational wave detectors are second generation instruments designed and built for the two LIGO observatories in Hanford, WA and Livingston, LA. The two instruments are identical in design, and are specialized versions…
The space-air-ground-sea integrated network (SAGSIN) plays an important role in offering global coverage. To improve the efficient utilization of spectral and hardware resources in the SAGSIN, integrated sensing and communications (ISAC)…