相关论文: Design of the Ess RFQs and Chopping Line

Three alternative designs of the European Spallation Source (ESS) high energy linac are described. The most promising ones are either a normalconducting (nc) coupled cavity linac (CCL) up tofinal energy or a change at 407 MeV to only one…

The development of a new RFQ Cooler, named SHIRaC, was carried out to handle and cool typical SPIRAL 2 beams of large emittances (up to 80 {\pi}.mm.mrad) and high currents (up to 1 {\micro}A). SHIRaC is a part of SPIRAL 2 facility at GANIL…

The development of the new RFQ Cooler, called SHIRaC, was carried out. As a part of SPIRAL 2 facility, SHIRaC aims to handle and cool typical SPIRAL 2 beams with large emittances (up to 80 pi.mm.mrad) and high currents (up to 1 uA). Its…

A 52MHz Radio Frequency Quadrupole (RFQ) linear accelerator (linac) is designed to serve as an initial structure for the SSC-linac system (injector into Separated Sector Cyclotron). The designed injection and output energy are 3.5 keV/u and…

A 5-MeV RFQ designed for a proton current up to 100-mA CW is now under construction as part of the High Intensity Proton Injector project (IPHI). Its computed transmission is greater than 99 %. The main goals of the project are to verify…

The construction of the initial part of a normally conducting linac for hydrogen ion beams with a pulsed current of ~20 mA up to an energy of ~70 MeV is considered. The RFQ at a frequency of ~160 MHz accelerates ions to an energy of ~4 MeV.…

Although accelerator technology has matured sufficiently, state-of-the-art X-ray linacs for radiotherapy and cargo-scanning capture merely 30-50% of the electrons from a thermionic cathode, requiring a higher cathode current and leaving…

Coupled superconducting transmission line resonators have applications in quantum information processing and fundamental quantum mechanics. A particular example is the realization of fast beam splitters, which however is hampered by…

We discuss the new problems emerging in charged beam transport for SASE FEL dynamics. The optimization of the magnetic transport system for future devices requires new concepts associated with the slice emittance and the slice phase space…

A 162.5 MHz, 2.1 MeV Radio Frequency Quadruples (RFQ) structure is being designed for the Injector Scheme II of China Accelerator Driver System (CADS) driver linac. The RFQ will operate at continuous wave (CW) mode as required. For the CW…

Radio Frequency Quadrupole (RFQ) accelerators often need to face the challenges of space charge effects from high beam currents. This study investigated how to reach RFQ beam dynamics designs with not only high beam transmission and short…

We propose Four-Dimensional (4D) energy limit enumerative sphere shaping (ESS) of $M$-QAM signaling to minimize rate loss and improve the transmission performance over non-linear WDM optical-fiber systems. Simulation results show that the…

The design and optimization of Reconfigurable Intelligent Surfaces (RISs) are key challenges for future wireless communication systems. RISs are devices that can manipulate electromagnetic (EM) waves in a programmable way, thus enhancing…

A superconducting radio-frequency (SRF) photo injector is in operation at the electron linac for beams with high brilliance and low emittance (ELBE) radiation center and generates continuous wave (CW) electron beams with high average…

We present the results of multi-objective genetic algorithm optimizations of a potential single shot ultra fast electron diffraction beamline utilizing a 100 MV/m 1.6 cell normal conducting rf (NCRF) gun, as well as a 9 cell 2pi/3 bunching…

Distribution networks are usually multiphase and radial. To facilitate power flow computation and optimization, two semidefinite programming (SDP) relaxations of the optimal power flow problem and a linear approximation of the power flow…

This paper focuses on the secure transmission of wireless-powered relay systems with imperfect eavesdropper channel state information (ECSI). For efficient energy transfer and information relaying, a novel two-phase protocol is proposed, in…

A beam dynamics design of 352.2 MHz Radio-Frequency Quadrupole (RFQ) of Turkish Accelerator Center (TAC) project which accelerates continuous wave (CW) proton beam with 30 mA current from 50 keV to 3 MeV kinetic energy has been performed in…

Beam diagnostics is important to guarantee good quality of beam in particle accelerator. Both the electron and positron run in the tunnel in some modern electron positron colliders such as Circular Electron Positron Collider (CEPC) to be…

A line driver with configurable pre-emphasis is implemented in a 65 nm CMOS process. The driver utilizes a three-tap feed-forward equalization (FFE) architecture. The relative delays between the taps are selectable in increments of 1/16th…