相关论文: Formation of ferromagnetic bulk amorphous Fe40Ni40…

Bulk ferromagnetic amorphous Fe-Ni-P-B alloys in rod shape were formed by a rapid solidification technique. The largest amorphous specimen prepared had a diameter of ~2.5 mm and the corresponding cooling rate for the glass formation of this…

The consolidations of two bulk amorphous Fe40Ni40P14B6 alloy discs are performed via hot pressing for a short time in its supercooled liquid region under a pressure of ~1.2 GPa. When the consolidated temperature Ts is lower, the conjunction…

Nanostructured Fe40Ni40P14B6 alloys ingots of diameter 3~5 mm could be synthesised by a metastable liquid state spinodal decomposition method. The molten Fe40Ni40P14B6 alloy was purified by means of the fluxing technique and thus a large…

As a promising remedy for overcoming the limited ductility and work softening of bulk metallic glasses (BMGs), BMG composites incorporating a B2 crystalline phase have attracted considerable attention. Here, we explore the formation of…

Bulk metallic glasses (BMGs) are amorphous alloys with desirable mechanical properties and processing capabilities. To date, the design of new BMGs has largely employed empirical rules and trial-and-error experimental approaches. Ab initio…

Bulk metallic glasses (BMGs) are produced by rapidly thermally quenching supercooled liquid metal alloys below the glass transition temperature at rates much faster than the critical cooling rate R_c below which crystallization occurs. The…

A quinary (La0.5Ce0.5)65Al10(Co0.6Cu0.4)25 alloy with superior glass-forming ability (GFA), identified by the formation of fully glassy rod of 32 mm in diameter by tilt-pour casting, was reported. By comparing with the GFA of quarternary…

Bulk metallic glass forms when liquid metal alloys solidify without crystalization. In the search for Iron-based bulk glass-forming alloys of the metal-metalloid type (Fe-B- and Fe-C-based), crystals based on the structural prototype C6Cr23…

Amorphous metallic foams are prospective materials due to unique combination of their mechanical and energy-absorption properties. In the present work, atomistic dynamics simulations are performed under isobaric conditions with the pressure…

The critical cooling rate $\mathcal{R}_c$, below which liquids crystallize upon cooling, characterizes the glass-forming ability (GFA) of the system. While pure metals are typically poor glass formers with $\mathcal {R}_c>10^{12}\, {\rm…

Metals in amorphous state are promising for the use as structural materials due to their superior properties related to the absence of grain boundaries and dislocations.Obtaining the amorphous state requires quenching with a high cooling…

This review deals with the kinetic and thermodynamic fragility of bulk metallic glass forming liquids. The experimental methods to determine the kinetic fragility, relaxation behavior and thermodynamic functions of undercooled metallic…

The high cooling rate needed for preparing the metallic glass (MG) makes the nonequilibrium nature of glass formation more prominent and requires a better quenching technique than ever before. Here, we formulate the cooling process in an…

This work gives insights into processing and characterisation of bulk nanocrystalline FeCr materials. The investigated FeCr alloys, consisting of 30, 50 and 70 at.% ferromagnetic Fe and remaining anti-ferromagnetic Cr, are processed by arc…

Understanding the formation of bulk metallic glasses (BMG) in metallic systems and finding a reliable criterion for selection of BMG compositions are among the most important issues in condensed matter physics and material science. Using…

A simple one-pot hydrothermal synthesis of single crystalline beta-MnO2 nanorods with diameters in the range of 10-40nm is reported. During the synthesis process, the acid molarities were varied from 1.1M down to 0.2M in steps of 0.3M while…

We performed high-frequency (0.4 to 1.7 MHz) measurements of the internal friction (IF) on 14 bulk metallic glasses (MGs). It is found that 12 of these MGs display relaxation IF peaks at temperatures T= 400-500 K, which are weakly affected…

We predict through our first-principles calculations that four double perovskite oxides of Bi2ABO6 (AB = FeMo, MnMo, MnOs, CrOs) are half-metallic ferrimagnets. Our calculated results shows that the four optimized structures have negative…

In the present investigation the glass forming ability of Ce65Al25Co10 metallic glass has been reported. It was successfully synthesised using melt spinning techniques. The existence of amorphous phase in Ce65Al25Co10 alloy have been proved…

Bulk single crystals of manganese phosphide (MnP) were grown from melt at 1 GPa and 1200 C by using a cubic-anvil, high-pressure, and high-temperature technique. The obtained black colored crystals exhibit a plate-like morphology, with flat…