相关论文: Far-field optical microscope with nanometer-scale …
Fourier ptychography (FP) is a promising computational imaging technique that overcomes the physical space-bandwidth product (SBP) limit of a conventional microscope by applying angular diversity illuminations. However, to date, the…
Metasurfaces are paving the way to improve traditional optical components by integrating multiple functionalities into one optically flat metasurface design. We demonstrate the implementation of a multifunctional gap surface plasmon-based…
We analyze the far field resolution of apertures which are illuminated by a point dipole located at subwavelength distances. It is well known that radiation emitted by a localized source can be considered a combination of travelling and…
A lens performs an approximately one-to-one mapping from the object to the image planes. This mapping in the image plane is maintained within a depth of field (or referred to as depth of focus, if the object is at infinity). This…
Nonlinear optical (NLO) imaging platforms traditionally rely on refractive microscope objectives, which suffer from chromatic aberrations and temporal dispersion of pulsed excitation light. These issues degrade spatial imaging properties…
Nano-optic imagers that modulate light at sub-wavelength scales could unlock unprecedented applications in diverse domains ranging from robotics to medicine. Although metasurface optics offer a path to such ultra-small imagers, existing…
We propose a novel technique of microscopy to overcome the effects of both scattering and limitation of the accessible depth due to the objective working distance. By combining Laser Optical Feedback Imaging (LOFI) with Acoustic Photon…
The spectral dispersion of light is critical in applications ranging from spectroscopy to sensing and optical communication technologies. We demonstrate that ultra-high spectral dispersion can be achieved with a finite-size surface plasmon…
A microscope based on the Linnik interferometer was designed, built, and tested. Two methods were used for interference pattern measurement: phase-shifting and polarized single-shot methods. The former uses a low coherence light emitting…
In this article, we report an imaging method, termed Fourier ptychographic microscopy (FPM), which iteratively stitches together a number of variably illuminated, low-resolution intensity images in Fourier space to produce a wide-field,…
We configure and analyze a nanostructured device that hybridizes grating modes and surface plasmon resonances. The model uses an effective index of refraction that considers the volume fraction of the involved materials, and the propagation…
We design plano-concave silicon lenses with coupled gradient-index plasmonic metacoatings for ultrawide apertured focusing utilizing a reduced region of $\sim 20 \lambda^2$. The anomalous refraction induced in the planar input side of the…
Imaging below the diffraction limit is always a public interest because of the restricted resolution of conventional imaging systems. To beat the limit, evanescent harmonics decaying in space must participate in the imaging process. Here,…
This paper proposes a non-computational method of counteracting the effect of image degradation introduced by the diffraction phenomenon in lensless microscopy. All the optical images (whether focused by lenses or not) are diffraction…
We report the experimental demonstration of deeply subwavelength far-field optical imaging of unlabelled samples with resolution better than $\lambda/20$. We beat the ~$\lambda$/2 diffraction limit of conventional optical microscopy several…
We report a novel extension to structured illumination (SI) microscopy that utilizes the Talbot self-imaging effect to generate a SI pattern on a sample with field-of-view (FOV) and resolution unconstrained by the numerical aperture (NA) of…
High-quality flat optical elements require efficient light deflection to large angles and over a wide wavelength spectrum. Although phase gradient metasurfaces achieve this by continuously adding phase shifts in the range of 0 to 2{\pi} to…
This article presents a method to perform diffraction tomography in a standard microscope that includes an LED array for illumination. After acquiring a sequence of intensity-only images of a thick sample, a ptychography-based…
A light field print (LFP) displays three-dimensional (3D) information to the naked-eye observer under ambient white light illumination. Changing perspectives of a 3D image are seen by the observer from varying angles. However, LFPs appear…
Near-field scanning optical microscopy has been an indispensable tool for designing, characterizing and understanding the functionalities of diverse nanoscale photonic devices. As the advances in fabrication technology have driven the…