相关论文: The effect of annealing on the elastoplastic respo…
Observations are reported on isotactic polypropylene (i) in a series of tensile tests with a constant strain rate on specimens annealed for 24 h at various temperatures in the range from 110 to 150 C and (ii) in two series of creep tests in…
Three series of tensile relaxation tests are performed on isotactic polypropylene at room temperature in the vicinity of the yield point. In the first series of experiments, injection-molded samples are used without thermal pre-treatment.…
Two series of uniaxial tensile tests are performed on isotactic polypropylene with the strain rates ranging from 5 to 200 mm/min. In the first series, injection-molded specimens are used without thermal pre-treatment, whereas in the other…
A series of tensile relaxation tests is performed on isotactic polypropylene in the sub-yield and post-yield regions at room temperature. Constitutive equations are derived for the time-dependent response of a semicrystalline polymer at…
Tensile creep tests, tensile relaxation tests and a tensile test with a constant rate of strain are performed on injection-molded isotactic polypropylene at room temperature in the vicinity of the yield point. A constitutive model is…
Observations are reported in isothermal torsional oscillation tests on melts of isotactic polypropylene (iPP) and low-density polyethylene (LDPE) in the intervals of temperature between 190 and 250C (iPP) and between 120 and 190C (LDPE).…
The effect of annealing on the dynamical behavior of swelling for ultrathin polyacrylamide films deposited on silicon substrates have been studied using X-ray reflectivity technique. The spin coated polyacrylamide films of similar…
The time-dependent response of polystyrene and poly(methyl methacrylate) is studied in isothermal long-term shear creep tests at small strains and various temperatures in the vicinity of the glass transition point. A micromechanical model…
Molecular dynamics simulations are performed to examine the dynamic response of amorphous solids to oscillatory shear at finite temperatures. The data were collected from a poorly annealed binary glass, which was deformed periodically in…
Results of torsional oscillation tests are reported that were performed at the temperature T=230C on melts of a hybrid nanocomposite consisting of isotactic polypropylene reinforced with 5 wt.% of montmorillonite clay. Prior to mechanical…
In this paper, we investigated the annealing experiments of poly(mercaptopropylmethylsiloxane, PMMS) confined within two types of porous templates (anodic aluminium oxide, AAO, and silica) characterized by different pore diameter, d=…
A constitutive model is developed for the mechanical response of elastomers at finite strains. A polymer is treated as a network of linear chains linked by permanent (chemical crosslinks) and temporary (entanglements and van der Waals…
In this work, the effects of thermal annealing at 500 {\deg}C on aerosol-deposited $0.65\text{Pb}(\text{Mg}_{1/3}\text{Nb}_{2/3})\text{O}_{3}-0.35\text{PbTiO}_{3}$ thick films on stainless-steel substrates are investigated using two…
The effect of finite temperature $T$ and finite strain rate $\dot\gamma$ on the statistical physics of plastic deformations in amorphous solids made of $N$ particles is investigated. We recognize three regimes of temperature where the…
Studying the response of materials to strain can elucidate subtle properties of electronic structure in strongly correlated materials. So far, mostly the relation between strain and resistivity, the so called elastoresistivity, has been…
Solids when rapidly and elastically stressed change temperature, the effect proposed by Lord Kelvin is adiabatic thermo-elastic cooling or heating depending on the sign of the stress. A fast sensitive IR camera has measured temperature both…
We investigate the effect of annealed disorder on the mechanical properties and plasticity of a modeled amorphous solid by introducing a small fraction of heavy impurities into the material which resembles real experimental systems. The…
The microscopic model of semi-crystalline polymer in high-elastic state is proposed. The model is based on the assumption that, below the melting temperature, the semi-crystalline polymer comprises crystal nuclei connected by stretched…
The structural properties of a linear polymer and its evolution in time have a strong bearing on its anisotropic stress response. The mean-square bond length and mean bond angle are the critical parameters that influence the time-varying…
Elastomers are viscoelastic materials and their properties significantly depend on the loading rate. The actual stress experienced by these materials is the sum of equilibrium and dissipative (inelastic) terms. At very low loading rates we…