相关论文: The CTIO Prime Focus CCD: System Characteristics f…

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST). FYST's crossed-Dragone design provides high optical throughput to take advantage of its unique site…

Astronomical CCD systems based on second-generation DINACON controllers were developed at the SAO RAS Advanced Design Laboratory more than seven years ago and since then have been in constant operation at the 6-meter and Zeiss-1000…

Aims. We describe a pilot study to explore a new generation of fast and low noise CMOS image sensors for time domain astronomy, using two remote telescopes with a baseline of 1800 km. Methods. Direct imaging with novel qCMOS image sensor…

As an in-house instrument developmental activity at ARIES, the 4Kx4K CCD Imager is designed and developed as a first-light instrument for the axial port of the 3.6m DOT. The f/9 beam of the telescope having a plate-scale of ~ 6.4 arc-sec/mm…

The Pan-STARRS telescope consists of an array of smaller mirrors viewed by a Gigapixel arrays of CCDs. These focal planes employ Orthogonal Transfer CCDs (OTCCDs) to allow on-chip image stabilization. Each OTCCD has advanced logic features…

We present the characterization of the CCD system developed for the ADFOSC instrument on the 3.6m Devasthal Optical Telescope (DOT). We describe various experiments performed to tune the CCD controller parameters to obtain optimum…

CCAT-prime will be a 6-meter aperture telescope operating from sub-mm to mm wavelengths, located at 5600 meters elevation on Cerro Chajnantor in the Atacama Desert in Chile. Its novel crossed-Dragone optical design will deliver a high…

Between 1997 and 2004 several observing runs were conducted mainly with the CTIO 0.9 m to image ICRF counterparts (mostly QSOs) in order to determine accurate optical positions. Contemporary to these deep CCD images the same fields were…

The second MAGIC telescope, a clone of the first 17 m diameter MAGIC telescope, has entered the final commissioning phase and will soon start to take data, preferentially in the so-called stereo-mode. The control system for both telescopes…

The EPIC focal plane imaging spectrometers on XMM-Newton use CCDs to record the images and spectra of celestial X-ray sources focused by the three X-ray mirrors. There is one camera at the focus of each mirror; two of the cameras contain…

The description is given for the speckle interferometer of the BTA 6-m telescope of the SAO RAS based on a new detector with an electron multiplication CCD. The main components of the instrument are microscope objectives, interference…

We report here the in orbit performance of the CCD camera (MAXI/SSC) onboard the International Space Station (ISS). It was commissioned in August, 2009. This is the first all-sky survey mission employing X-ray CCDs. It consists of 32 CCDs…

The Advanced CCD Imaging Spectrometer (ACIS) is one of two focal-plane instruments on the Chandra X-ray Observatory. During initial radiation-belt passes, the exposed ACIS suffered significant radiation damage from trapped soft protons…

We report on the first daytime on-sky results of a Phase Knife stellar Coronagraph operated in the visible from the French-Italian Concordia station at Dome C of Antarctica. This site has proven in the last few years to offer excellent…

Prime-Cam is a first-generation instrument for the Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) Facility. The 850$~$GHz module for Prime-Cam will probe the highest frequency of all the instrument modules. We describe the parameter…

The Kitt Peak Electron Multiplying CCD (EMCCD) demonstrator is a new instrument that has been developed for use at the Kitt Peak National Observatory's 84-inch telescope. The EMCCD enables single-band optical imaging in the Sloan \textit{g}…

After proposing a new method of deriving the atmospheric time constant from the speed of focus variations (Kellerer & Tokovinin 2007), we now implement it with the new instrument, FADE. FADE uses a 36-cm Celestron telescope that is modified…

The Chandra X-Ray Observatory (CXO), the x-ray component of NASA's Great Observatories, was launched on 1999, July 23 by the Space Shuttle Columbia. After satellite systems activation, the first x-rays focussed by the telescope were…

An EMCCD camera, designed from the ground up for extreme faint flux imaging, is presented. CCCP, the CCD Controller for Counting Photons, has been integrated with a CCD97 EMCCD from e2v technologies into a scientific camera at the…

Most of the scientific instrumentation as well as the tracking systems and the Shack- Hartmann wavefront analysers at the Italian National Telescope Galileo use CCDs as detectors. The characterization of detectors is of fundamental…