相关论文: Refractive index retrieval of 3D printed materials…
Polymeric materials are prized for their formability, low density, and functional versatility. However, the refractive indices of common polymers fall in a relatively narrow range between 1.4 and 1.6. Here, we demonstrate that loading…
Poly(methyl methacrylate), PMMA, is a popular polymer for optical applications due to its superior transmission and reflection. However, its optical properties in the ultraviolet regime still need to be thoroughly studied. Using the…
A method to engineer the refractive indices of functional materials (TiO2, ZnO, SnO2, SiO2), by nanostructuring in the deep sub-wavelength regime (<20nm), is presented. Block-copolymer templating combined with a wet processing route is used…
Polymer compounds from titania-doped polyethylene are fabricated and their linear optical properties characterized by THz-TDS. We show that high concentration of dopants not only enhances the refractive index of the composite material, but…
Photopolymerization enables the production of micro-optical elements, such as diffractive optical elements or GRIN optics. This process utilizes targeted spatial modulation of the refractive index, which is achieved through additive…
There are two main physical properties needed to fabricate 1D photonic structures and form perfect photonic bandgaps: the quality of the thickness periodicity and the refractive index of their components. Porous silicon (PS) is a…
We report comprehensive measurements of the refractive index as a function of wavelength and temperature for four less commonly studied glycols: pentaethylene glycol, hexaethylene glycol, dipropylene glycol (mixture of isomers), and…
We report the design, nanofabrication, and characterization of high-quality polymer-based micromirror structures employing the 3D two-photon polymerization lithography technique. Compared to conventional microcavity approaches, our…
A frequency-diverse computational imaging system synthesized using three-dimensional (3D) printed frequency-diverse metasurface antennas is demonstrated. The 3D fabrication of the antennas is achieved using a combination of PolyLactic Acid…
The scientific community has witnessed tremendous expansion of research on layered (i.e. two-dimensional, 2D) materials, with increasing recent focus on applications to photonics. Layered materials are particularly exciting for manipulating…
The optical properties of the `bialkali' KCsSb and RbCsSb photomultiplier cathodes have been experimentally investigated in the visible range. The measurements carried out include the absolute reflectance at near-normal incidence, the…
Microplastics are pervasive pollutants that pose threats to the environment and human health. Detecting them reliably represents a crucial step toward finding solutions. While traditional techniques like vibrational and mass spectroscopies…
The optical properties of BAlN and BGaN ternary alloys are investigated using first-principle calculation. Hybrid density functional theory is applied to determine the refractive indices of different alloys. A peculiar non-linear behavior…
Photonic integration on plastic substrates enables emerging applications ranging from flexible interconnects to conformal sensors on biological tissues. Such devices are traditionally fabricated using pattern transfer, which is complicated…
Recent advancements in 3D reconstruction, especially through neural rendering approaches like Neural Radiance Fields (NeRF) and Plenoxel, have led to high-quality 3D visualizations. However, these methods are optimized for digital…
The extraordinary properties of resonant four-wave mixing of backward waves in doped negative-index materials are investigated. The feasibility of independent engineering of negative refractive index and nonlinear optical response as well…
White light spectral interferometry is applied to measure the refractive index in absorbing liquids in the spectral range from 400 to 1000 nm. We analyze the influence of absorption on the visibility of interferometric fringes and,…
We demonstrate a novel, composite laser written 3D waveguide, fabricated in boro-aluminosilicate glass, with a refractive index contrast of 1.12 x 10^-2. The waveguide is fabricated using a multi-pass approach which leverages the respective…
We present the design, manufacturing technique, and characterization of a 3D-printed broadband graded index millimeter wave absorber. The absorber is additively manufactured using a fused filament fabrication (FFF) 3D printer out of a…
In two-photon polymerization (TPP), the degree of conversion (DC) of the resin has an effect on a broad range of material properties like refractive index (RI) or stiffness. Heterogeneous DC can substitute material doping and multimaterial…