相关论文: A Guide to Fully Characterize the Fracture Propert…
Since their initial standardizations in the 1930s and 1950s, the so-called four-point and three-point bending tests on unnotched beams have been embraced by practitioners as two popular methods to indirectly measure the tensile strength of…
This work presents a comprehensive investigation of the elastic and fracture behavior of ply-to-ply angle interlock three-dimensional woven composites. The research investigated novel splitting and wedge-driven out-of-plane fracture tests…
This study investigated, experimentally and numerically, the fracturing behavior of thermoset polymer structures featuring cracks and sharp u-notches. It is shown that, even for cases in which the sharpness of the notch would suggest…
Fractured metal fragments with rough and irregular surfaces are often found at crime scenes. Current forensic practice visually inspects the complex jagged trajectory of fractured surfaces to recognize a ``match'' using comparative…
The accurate measurement of fracture resistance in elastomers is essential for predicting the mechanical limits of soft devices. Usually, this is achieved by performing tearing or peeling experiments on thin-sheet samples. Here, we show…
Over the past seven years, full-field analyses of a wide range of classical as well as modern quasi-static fracture experiments on nominally elastic brittle materials -- ranging from hard ceramics to soft elastomers -- have repeatedly…
This paper presents a macroscopic theory, alongside its numerical implementation, aimed at describing, explaining, and predicting the nucleation and propagation of fracture in viscoelastic materials subjected to quasistatic loading…
In this work a novel methodology for fracture toughness characterization by means of the small punch test (SPT) is presented. Notched specimens are employed and fracture resistance is assessed through a critical value of the notch mouth…
Soft polymers are ubiquitous materials in nature and as engineering materials with properties varying from rate-independent to rate-dependent. Current fracture toughness measures are non-unique for rate-dependent soft materials for varying…
A field theory is presented for predicting damage and fracture in quasi-brittle materials. The approach taken here is new and blends a non-local constitutive law with a two-point phase field. In this formulation, the material displacement…
Numerical simulations of concrete fracture performed with a probabilistic mesoscale discrete model are presented. The model represents a substantial part of material randomness by assigning random locations to the largest aggregates. The…
Shale, a fine-grained sedimentary rock, is the key source rock for many of the world's most important oil and natural gas deposits. A deep understanding of the mechanical properties of shale is of vital importance in various geotechnical…
We test and simulate the mesoscopic cracking behavior of specimens made of a standard concrete mixture. To this end, we combine stable wedge-splitting fracture experiments performed during X-ray tomography, their analysis with digital…
A mix-mode cohesive fracture model considering tension, compression and shear material behaviour is presented, which has wide applications to geotechnical problems. The model considers both elastic and inelastic displacements. Inelastic…
Understanding the fracture mechanics of soft solids remains a fundamental challenge due to their complex, nonlinear responses under large deformations. While multiaxial loading is key to probing their mechanical behavior, the role of such…
Finite element models of the thorax are under development to assist vehicle safety researchers with the design of countermeasures such as advanced restrain systems. Computational models have become more refined with increasing geometrical…
Fracture is the ultimate source of failure of amorphous carbon (a-C) films, however it is challenging to measure fracture properties of a-C from nano-indentation tests and results of reported experiments are not consistent. Here, we use…
Disorder and long-range interactions are two of the key components that make material failure an interesting playfield for the application of statistical mechanics. The cornerstone in this respect has been lattice models of the fracture in…
In this work we present the design of a new test geometry inspired by the Tapered Double Cantilever Beam (TDCB) specimen that is shown to provide an improved characterization of the fracture properties of brittle solids. First, we show that…
Rapid progress in additive manufacturing methods has created a new class of ultralight and strong architected metamaterials that resemble periodic truss structures. The mechanical performance of these metamaterials with a very large number…