相关论文: Characterizing Fill Factor Limitations in Perovski…
The enhancement of the fill factor in the current generation of perovskite solar cells is the key for further efficiency improvement. Thus, methods to quantify the fill factor losses are urgently needed. A classical method to quantify Ohmic…
Perovskite/Si tandem solar cells have the potential to considerably out-perform conventional solar cells. Under standard test conditions, perovskite/Si tandem solar cells already outperform the Si single junction. Under realistic…
As single junction thin-film technologies, both Si heterojunction (HIT) and Perovskite based solar cells promise high efficiencies at low cost. One expects that a tandem cell design with these cells connected in series will improve the…
Perovskite-silicon tandem solar cells are currently one of the most investigated concepts to overcome the theoretical limit for the power conversion efficiency of silicon solar cells. For monolithic tandem solar cells the available light…
All-perovskite tandem solar cells promise high photovoltaic performance at low cost. So far however, their efficiencies cannot compete with traditional inorganic multi-junction solar cells and they generally underperform in comparison to…
The power conversion efficiency of the market-dominating silicon photovoltaics approaches its theoretical limit. Bifacial solar operation with harvesting additional light impinging on the module back and the perovskite/silicon tandem device…
Fully-textured perovskite/silicon tandem solar cells have emerged as promising candidates for next-generation photovoltaics. The optical functions of full texturing, however, are not yet fully understood. A key challenge is the requirement…
Thanks to their excellent properties of low cost, lightweight, portability, and conformity, flexible perovskite-based tandem solar cells show great potentials for energy harvesting applications, with flexible perovskite/c-silicon tandem…
In this study, the optoelectronic properties of a monolithically integrated series-connected tandem solar cell are simulated. Following the large success of hybrid organic-inorganic perovskites, which have recently demonstrated large…
We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 %…
Understanding and quantifying the main loss factors affecting the power conversion efficiency of perovskite solar cells are urgently needed. In this work, based on semiconductor physics, the expressions of bulk and surface recombination…
A modified detailed balance model is built to understand and quantify efficiency loss of perovskite solar cells. The modified model captures the light-absorption dependent short-circuit current, contact and transport-layer modified carrier…
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks.…
The economic value of a photovoltaic installation depends upon both its lifetime and power conversion efficiency. Progress towards the latter includes mechanisms to circumvent the Shockley- Queisser limit, such as tandem designs and…
The quest for optimal perovskite for tandem cell configurations is challenging as it involves several factors ranging from device level performance under field conditions to degradation rates and cost. Here, we first highlight the…
Silicon solar cells dominate the solar cell market with record lab efficiencies reaching almost 26%. However, after 60 years of research, this efficiency saturated close to the theoretical limit for silicon, and radically new approaches are…
Presented here is the optimization of a planar two-terminal perovskite/silicon tandem solar cell with a texture structure. The developed simulation model is fitted to published experimental results, and the importance of current matching in…
There are recent investigations regarding tandem solar cells with a top perovskite cell and a bottom silicon one with a potential of > 25% power conversion efficiency. Because of still high production costs of silicon cells it is believed…
Luminescent coupling is a characteristic of multi-junction solar cells which has often been neglected in models of their performance. The effect describes the absorption of light emitted from a higher band gap semiconductor by a lower band…
Singlet fission, an exciton multiplication process in organic semiconductors which converts one singlet exciton into two triplet excitons is a promising way to reduce thermalization losses in conventional solar cells. One way to harvest…