相关论文: Morphology dependent decomposition and pore evolut…
In this paper, the oxidation-assisted dealloying (OAD) of Cu0.7Al0.3 films with different microstructures which were obtained by high vacuum annealing at different temperatures were studied using powder X-ray diffraction, field-emission…
Molecular dynamics simulations were used to quantify mechanically-induced structural evolution in nanocrystalline Al with an average grain size of 5 nm. A polycrystalline sample was cyclically strained at different temperatures, while a…
The local variation of grain boundary atomic structure and chemistry caused by segregation of impurities influences the macroscopic properties of poylcrystalline materials. Here, the effect of co-segregation of carbon and boron on the…
Aluminum-Copper (Al-Cu) alloys are essential materials for weight reduction critical structures in the aerospace and automotive industries, yet achieving their maximum ultrahigh-strength potential remains limited by nanoscale defect control…
Solvent-based techniques usually involve preparing dilute blends of electron-donor and electron-acceptor materials dissolved in a volatile solvent. After some form of coating onto a substrate, the solvent evaporates. An initially…
Intergranular attack of alloys under hydrothermal conditions is a complex problem that depends on metal and oxygen transport kinetics via solid-state and channel-like pathways to an advancing oxidation front. Experiments reveal very…
Aluminum alloys are increasingly utilized as lightweight materials in the automobile industry due to their superior capability in withstanding high mechanical loads. A significant challenge impeding the large-scale use of these alloys in…
In this paper we demonstrated the thermal Atomic Layer Deposition (ALD) growth at 250 {\deg}C of highly homogeneous and ultra-thin ($\approx$ 3.6 nm) $Al_2O_3$ films with excellent insulating properties directly onto a monolayer (1L)…
The evolution of occupied volume under progressive fragmentation of granular matter is studied using a purely geometric model. Rather than modelling disorder directly, properties are investigated by analysing highly ordered reference…
An ever growing number of observational and theoretical evidence suggests that the deuterated fraction (column density ratio between a species containing D and its hydrogenated counterpart, Dfrac) is an evolutionary indicator both in the…
Carbon is one of the most investigated materials and shows chaotic behavior in terms of evolving structure. Synthesizing carbon materials largely depend on the deposition technique, process parameters, condition of substrate surface and…
Cu-Cr-based alloys with Cr content from 5 to 50 wt.% are widely used as electrical contacts for vacuum interrupters for medium voltage applications because of their excellent combination of mechanical, thermal, and electrical conductivity.…
We study the changes in physical and chemical conditions during the collapse of a pre--protostellar core, starting from initial conditions appropriate to a dense molecular cloud and proceeding to the ``completely depleted'' limit. We follow…
Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by…
Atomic layer deposition (ALD) enables the conformal coating of porous materials, making the technique suitable for pore size tuning at the atomic level, e.g., for applications in catalysis, gas separation and sensing. It is, however, not…
The wear-driven structural evolution of nanocrystalline Cu was simulated with molecular dynamics under constant normal loads, followed by a quantitative analysis. While the microstructure far away from the sliding contact remains unchanged,…
Fe-Cr binary alloys serve as simplified model systems to study irradiation damage relevant to fusion structural materials. Here, Fe-3%Cr and Fe-5%Cr samples were irradiated with 4 MeV Fe ions under a dose rate of 4x10^5 dpa/s across a…
Through an integrated macroscale/mesoscale computational model, we investigate the developing shape and grain morphology during the melting and solidification of a weld. In addition to macroscale surface tension driven fluid flow and heat…
The sliding motion of objects is typically governed by their friction with the underlying surface. Compared to translational friction, however, rotational friction has received much less attention. Here, we experimentally and theoretically…
Grain boundaries facet due to anisotropic grain boundary energies: While the faceted boundary has a larger area than the corresponding straight boundary, a significantly lower energy of the facets compared to a straight segment can drive…