相关论文: Manufacturing Tolerances of Non-Planar Coils for a…

Design and modeling of a stellarator fusion reactor is a multidisciplinary effort that requires a tight integration between simulation of highly nonlinear multi-physics and representation of non-planar complex geometries. The critical…

The rapidly emerging technology of high-temperature superconductors (HTS) opens new opportunities for the development of non-planar non-insulated HTS magnets. This type of HTS magnet offers attractive features via its simplicity,…

It was recently shown in [Wechsung et. al., Proc. Natl. Acad. Sci. USA, 2022] that there exist electromagnetic coils that generate magnetic fields which are excellent approximations to quasi-symmetric fields and have very good particle…

Error fields are predominantly attributed to inevitable coil imperfections. Controlling error fields during coil fabrication and assembly is crucial for stellarators. Excessively tight coil tolerance increases time and cost, and, in part,…

In this work, we utilize new coil objectives for stellarator optimization with autodifferentiation, including pointwise and net coil-coil forces and torques. We use these methods to perform the first large-scale optimization of planar…

Filament-based coil optimizations are performed for several quasihelical stellarator configurations, notably the one from [M. Landreman, E. Paul, PRL 128, 035001, 2022], demonstrating that precise quasihelical symmetry can be achieved with…

Stellarators present features such as steady-state operation and intrinsic stability that make them more attractive than tokamaks in their scaling to fusion power plants. By leveraging more possible configurations, stellarators can be…

We report on the test of a small scale, non-planar coil using non-insulated ReBCO tape wound on a 3D-printed aluminum support structure. A 3D-scan of the winding frame which was printed out of AlSi10Mg using selective laser melting, showed…

In stellarators, achieving effective divertor configurations is challenging due to the three-dimensional nature of the magnetic fields, which often leads to chaotic field lines and fuzzy separatrices. This work presents a novel approach to…

In recent years many efforts have been undertaken to simplify coil designs for stellarators due to the difficulties in fabricating non-planar coils. The FOCUS code removes the need for a winding surface and represents the coils as arbitrary…

This work provides an optimization mechanism to ensure the compatibility of ReBCO (Rare-earth Barium Copper Oxide) high-temperature superconducting (HTS) tapes with non-planar stellarator coils. ReBCO coils enable higher field strengths and…

The Columbia Stellarator eXperiment (CSX) is an upgrade of the Columbia Non-neutral Torus (CNT) that aims to demonstrate a university-scale, quasi-axisymmetric stellarator using high-temperature superconducting (HTS) technology at an…

Accelerators magnets must have minimal magnetic field imperfections for reducing particle-beam instabilities. In the case of coils made of high-temperature superconducting (HTS) tapes, the field imperfections from persistent currents need…

Finding an easy-to-build coils set has been a critical issue for stellarator design for decades. Conventional approaches assume a toroidal "winding" surface. We'll investigate if the existence of winding surface unnecessarily constrains the…

This study investigates a simplified stellarator configuration employing circular coils, in which rotational transform is generated by tilting the toroidal field (TF) coils. A pair of axisymmetric poloidal field (PF) coils is introduced to…

We have developed a fast method to design perpendicular permanent magnets for simplifying stellarator coils based on existing codes. Coil complexity is one of the main challenges for stellarators. To date, only electromagnetic coils have…

We present a new coil design paradigm for magnetic confinement in stellarators. Our approach directly optimizes coil shapes and coil currents to produce a vacuum quasi-symmetric magnetic field with a target rotational transform on the…

Advanced stellarators require convoluted modular coils to produce a plasma with satisfactory performance. Moreover, the number of coils is sometimes high to decrease the modular ripple created by the coils. For reactor stellarators, these…

The reduction of magnetic forces on electromagnetic coils is an important consideration in the design of high-field devices such as the stellarator or tokamak. Unfortunately, these forces may be too time-consuming to evaluate by…

Balancing plasma performance and coil cost is a significant challenge when designing a stellarator power plant. Most current stellarator designs are produced through two-stage optimization: stage-1 for the equilibrium and stage-2 for a coil…