相关论文: Surface curvature and secondary vortices in steady…
Granular flows down inclined channels with smooth boundaries are common in nature and in the industry. Nevertheless, the common setup of flat boundaries has comparatively been much less investigated than the bumpy boundaries one, which is…
This study examines the flow of dense granular materials under external shear stress and pressure using discrete element method simulations. In this method, the material is allowed to strain along all periodic directions and adapt its solid…
Turbulent flow over a surface with streamwise-elongated rough and smooth stripes is studied by means of direct numerical simulation (DNS) in a periodic plane open channel with fully resolved roughness. The goal is to understand how the mean…
Secondary flows are ubiquitous in channel flows, where small velocity components perpendicular to the main velocity appear due to the complexity of the channel geometry and/or that of the flow itself such as from inertial or non-Newtonian…
The rheology of surface granular flows is investigated by means of measurements of velocity and number density profiles in a quasi-two-dimensional rotating cylinder, half-filled with mono-disperse steel balls. The measurements are made at…
Depth averaged conservation equations are written for granular surface flows. Their application to the study of steady surface flows in a rotating drum allows to find experimentally the constitutive relations needed to close these equations…
We perform discrete element method (DEM) simulations of elongated grains in a shear cell for various particle aspect ratios and contact frictions, with an additional heterogeneous force perturbation in the flow direction. For a perturbation…
We investigated the pressure-driven flow in curved channels at low aspect ratio, the latter being the ratio between the channel height (along the axial direction) and width (along the radial direction). The dynamics was studied numerically,…
We report and analyze the results of numerical studies of dense granular flows in two and three dimensions, using both linear damped springs and Hertzian force laws between particles. Chute flow generically produces a constant density…
The steady flow of spherical particles in a rectangular bin is studied using the Discrete Element Method (DEM) for different flow rates of the particles from the bin, in the slow flow regime. The flow has two non-zero velocity components…
Following the findings in \cite{wangsawijaya2020}, we re-examine the turbulent boundary layers developing over surfaces with spanwise heterogeneous roughness of various roughness wavelengths $0.32 \leq S/\overline{\delta} \leq 3.63$, where…
A rapid predictive tool based on the linearised Reynolds-averaged Navier-Stokes equations is proposed in this work to investigate secondary currents generated by streamwise-independent surface topography modulations in turbulent channel…
Recent numerical work has shown that high-speed confined granular flows down inclines exhibit a rich variety of flow patterns, including dense unidirectional flows, flows with longitudinal vortices and supported flows characterized by a…
Studies of granular materials, both theoretical and experimental, are often restricted to convex grain shapes. We demonstrate that a non-convex grain shape can lead to a qualitatively novel macroscopic dynamics. Spatial crosses (hexapods)…
We study the flow of equal-volume binary granular mixtures of spheres and dumbbells with different aspect ratios down a rough inclined plane, using the discrete element method. We consider two types of mixtures -- in the first type the…
Control surface deployment in a supersonic flow has many applications, including flow control, mixing, and body-force regulation. The extent of control surface deflections introduces varying flow unsteadiness. The resulting fluid dynamics…
Prandtl's secondary flows of the second kind generated by laterally-varying roughness are studied using the linearised Reynolds-Averaged Navier-Stokes approach proposed in Zampino et al (2022). The momentum equations are coupled to the…
The form of the stress tensor is investigated in smooth, dense granular flows which are generated in split-bottom shear geometries. We find that, within a fluctuation fluidized spatial region, the form of the stress tensor is directly…
The kinematic flow pattern in slow deformation of a model dense granular medium is studied at high resolution using \emph{in situ} imaging, coupled with particle tracking. The deformation configuration is indentation by a flat punch under…
After extensive quasi-static shearing, dense dry granular flows attain a steady-state condition of porosity and deviatoric stress, even as particles are continually rearranged. The paper considers two-dimensional flow and derives the…