相关论文: Designing artificial zinc phosphate tribofilms wit…
Zinc dialkyldithiophosphates (ZDDPs) have been commonly used as anti-wear additives in the automotive industry for the past 80 years. The morphology, composition and structure of the ZDDPs phosphate-based tribofilm, which is essential for…
Nanoindentation tests were performed at several temperatures (24 to 80degC) on one antiwear zinc dialkyl-dithiophosphate (ZDTP) tribofilm using a Nanoindenter XP (R) entirely set into a climatic chamber. Mechanical properties of the…
Previous studies have shown that the elastic properties of Zinc Dialkyl-dithiophosphate (ZDTP) tribofilms measured by nanoindentation increase versus applied pressure (Anvil effect) [1, 2]. The aim of this paper is to demonstrate that, up…
Organic friction modifiers (OFMs) are important additives in the lubrication of machines and especially of car engines where performance improvements are constantly sought-after. Together with zinc dialkyldithiophosphates (ZDDPs) antiwear…
The layered structure and the rheological properties of anti-wear films, generated in a rolling/sliding contact from lubricants containing zinc dialkyldithiophosphate (ZDTP) and/or molybdenum dialkyldithiocarbamate (MoDTC) additives, have…
The study uses AACVD technology with nitrogen carrier gas to make AZO thin films through which it determines structural, optical, and morphological changes from 0 to 20 percent aluminum doping. The depositions took place at 400 degrees…
Zinc nitride films were synthesized by reactive radio frequency (rf) magnetron sputtering of a zinc target using an Ar+N2 mixture. The as-deposited films were annealed in the air and O2 at 300 {\deg}C for 1 hr. The XRD measurements…
The problem of detecting the ability of some metal oxides as photocatalysts is receiving considerable attention in the world. The studied zinc oxide is considered as one of the most utilized semiconductors, due to its direct band gap of…
Copper-doped zinc sulphide (ZnS:Cu) thin films were synthesized through pulsed laser ablation in an inert background gas on stationary and rotating substrates, and a comprehensive opto-electrical characterisation is presented. The…
Growing energy storage demands on lithium-ion batteries necessitate exploration of new electrochemical materials as next-generation battery electrode materials. In this work, we investigate the previously unexplored electrochemical…
A comparative study of the physical properties of undoped Zinc Oxide (ZnO) and Al doped Zinc Oxide (AZO) thin films were performed as a function of annealing temperature. The structural properties were analyzed using X-ray diffraction and…
Demand for artificial body implants has been on the rise over the years. However, wear and bacterial infection are identified as two major reasons that can lead to inflammation and implant failure. In this communication, the advantages of…
In recent years, the investigation of novel materials for various technological applications has gained much importance in materials science research. Tri-molybdenum phosphide (Mo3P), a promising transition metal phosphide (TMP), has…
Metal organic frameworks (MOFs) are promising photocatalytic materials due to their high surface area and tuneability of their electronic structure. We discuss here how to engineer the band structures and optical properties of a family of…
The strong metal-support interaction (SMSI) leads to substantial changes of the properties of an oxide-supported catalyst after annealing under reducing conditions. The common explanation is the formation of heavily reduced, ultrathin oxide…
Electron conduction through bare metal oxide nanocrystal (NC) films is hindered by surface depletion regions resulting from the presence of surface states. We control the radial dopant distribution in tin-doped indium oxide (ITO) NCs as a…
The performance of phosphorus-based lubricant additives is governed by their adsorption, stability, and reactivity at the metal interface. In this study, we investigate the adsorption behavior and tribochemical stability of three additives:…
Zinc phosphorus trisulfide (ZnPS$_3$), a promising material for photocatalysis and energy storage, is shown in this study to exhibit remarkable stability under extreme conditions. We explore its optical and structural properties under high…
Zinc dialkyldithiophosphates (ZDDPs) are one of the most common anti-wear additives present in commercially-available motor oils. The ZDDP concentrations of motor oils are most commonly determined using inductively coupled plasma atomic…
Phosphorus-based lubricant additives are used for protecting metallic contacts under boundary lubrication by forming surface films that reduce wear and friction. Despite their importance, the molecular mechanisms driving their…