相关论文: Profile control of fibre-based micro-mirrors using…
We present a novel method of machining optical fiber surfaces with a CO${}_2$ laser for use in Fiber-based Fabry-Perot Cavities (FFPCs). Previously FFPCs were prone to large birefringence and limited to relatively short cavity lengths…
Fabry-Perot cavities are essential tools for applications like precision metrology, optomechanics and quantum technologies. A major challenge is the creation of microscopic spherical mirror structures which allow the precise matching with…
We demonstrate fiber Fabry-Perot (FFP) cavities with concave mirrors that can be operated at cavity lengths as large as 1.5mm without significant deterioration of the finesse. This is achieved by using a laser dot machining technique to…
We have realized a fiber-based Fabry-Perot cavity with CO2 laser-machined mirrors. It combines very small size, high finesse F>=130000, small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination…
We present a high-yield method for fabricating concave micromirror templates in silica using feedback-controlled CO2 laser ablation with precise in situ positioning. Real-time monitoring of the white-light emission generated during ablation…
We present a method to engineer the frequency splitting of polarization eigenmodes in fiber Fabry-Perot (FFP) cavities. Using specific pattern of multiple CO$_2$ laser pulses, we machine paraboloidal micromirrors with controlled elliptical…
Fabry-Perot interferometers have stimulated numerous scientific and technical applications ranging from high resolution spectroscopy over metrology, optical filters to interfaces of light and matter at the quantum limit and more. End facet…
We report the development of a fiber-based, tunable optical cavity with open access. The cavity is of the Fabry-Perot type and is formed with miniature spherical mirrors positioned on the end of single- or multi-mode optical fibers by a…
Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical…
We demonstrate laser-written concave hemispherical structures produced on the endfacets of optical fibers that serve as mirror substrates for tunable open-access microcavities. We achieve finesse values of up to 250, and a mostly constant…
We present the fabrication of exceptionally small-radius concave microoptics on fused silica substrates using CO2 laser ablation and subsequent reactive ion etching. The protocol yields on-axis near-Gaussian depressions with radius of…
We realize mirror templates on the tips of optical fibers using a single-shot CO$_2$ laser ablation procedure. We perform a systematic study of the influence of the pulse power, pulse duration, and laser spot size on the radius of…
We present three high finesse tunable monolithic fiber Fabry-Perot cavities (FFPCs) with high passive mechanical stability. The fiber mirrors are fixed inside slotted glass ferrules, which guarantee an inherent alignment of the resonators.…
In fiber based Fabry-P\'{e}rot Cavities (FFPCs), limited spatial mode matching between the cavity mode and input/output modes has been the main hindrance for many applications. We have demonstrated a versatile mode matching method for…
Optical spectroscopic sensors are powerful tools for analysing gas mixtures in industrial and scientific applications. Whilst highly sensitive spectrometers tend to have a large footprint, miniaturized optical devices usually lack…
The ray dynamics of optical cavities exhibits bifurcation points: special geometries at which ray trajectories switch abruptly between stable and unstable. A prominent example is the Fabry-Perot cavity with two planar mirrors, which is…
We introduce an adaptive optical refinement method enabling ultra-precise micro-milling of arbitrary surfaces. Through repeated iteration, our method reduces surface error without requiring significant specific surface engineering. This…
Frequency-modulated continuous-wave (FMCW) is a ranging technique that allows for high precision distance measurement over long distances. Scanning nonlinearity and range of the tunable laser are the main factors affecting the measurement…
Coupling an emitter to a Fabry-P\'{e}rot optical cavity can provide a coherent and strong light-matter interface whose performance in a variety of applications depends critically on the emitter-photon coupling strength. Altering the…
We present an all-fiber, fully open Fabry-Perot interferometer (FPI) cavity that is suitable for fluidic measurement applications. Fabrication of the FPI involves the alignment and bonding of three optical fiber sections using either…