相关论文: Enhanced optical performance of GaN Micro-light-em…

Light emitting diodes (LEDs) based on Gallium Nitride (GaN) have been revolutionizing various applications in lighting, displays, medical equipment, and other fields. However, their energy efficiency is still below expectations in many…

Localized surface plasmons (LSPs) have played a significant role in improving the light emission efficiency of light emitting diodes (LEDs). In this report, polygonal nanoholes have been fabricated in the p-GaN layer of InGaN-based LEDs by…

Recently, the use of bottom-TJ geometry in LEDs, which achieves N-polar-like alignment of polarization fields in conventional metal-polar orientations, has enabled enhancements in LED performance due to improved injection efficiency. Here,…

Efficiency droop, i.e., a decline in brightness of LEDs at high electrical currents, has limited the performance of all commercially available LEDs. Until now, it has limited the output power of sub-micron LEDs and lasers to nanowatt range.…

AlN layers with thicknesses between 2 and 14 nm were grown on Si(111) substrates by molecular beam epitaxy. The effect of the AlN layer thickness on the morphology and nucleation time of spontaneously formed GaN nanowires (NWs) was…

III-V nitride semiconductors, represented by GaN, have attracted significant research attention. Driven by the growing interest in smart micro-displays, there is a strong desire to achieve enhanced light output from even smaller…

Indium gallium nitride (InGaN) quantum well (QW) micro- and nanoscale light-emitting diodes (LEDs) are promising for next-generation ultrafast optical interconnects and augmented/virtual reality displays. However, scaling to nanoscale…

Resonant cavity LEDs (RCLEDs) exhibit excellent temporal and spatial coherence with narrow spectral linewidth and small divergence angle, which is of great importance for micro-displays. In this paper, we demonstrate a novel method to…

Light-emitting diodes based on perovskite nanocrystals (PNCs-LEDs) have gained great interest for next-generation display and lighting technologies prized for their color purity, high brightness and luminous efficiency approaching the…

We compare the temperature dependence of optical and electrical characteristics of commercially available GaN light-emitting diodes (LEDs) grown on silicon and sapphire substrates. Contrary to conventional expectations, LEDs grown on…

In this paper the design, fabrication and characterization of a bioinspired overlayer deposited on a GaN LED is described. The purpose of this overlayer is to improve light extraction into air from the diode's high refractive-index active…

We fabricated polygonal nanoholes in the top p-GaN layer of the InGaN/GaN light-emitting diode, followed by the deposition of Au/Al metal thin film within the nanoholes to create metal microcavities, thereby constructing the surface plasmon…

A GaN resonant cavity light emitting diode was built on a GaN-AlN distributed Bragg reflector grown on a silicon substrate. The electroluminescence output increased by 2.5 times for a GaN diode coupled to a properly designed resonant…

The demand for higher resolution displays drives the demand for smaller pixels. Displays show a trend of doubling the pixel number every 4 years and doubling the pixel per inch (PPI) every 6 years. As the prospective candidate for…

Silver nanoparticles dispersed on the surface of an inverted GaN LED were found to plasmonically enhance the near-bandedge emission. The resonant surface plasmon coupling led to a significant enhancement in the exciton decay rate and the…

III-Nitride light emitting diodes (LEDs) are widely used in a range of high efficiency lighting and display applications, which have enabled significant energy savings in the last decade. Despite the wide application of GaN LEDs, transport…

Silicon-compatible short- and mid-wave infrared emitters are highly sought-after for on-chip monolithic integration of electronic and photonic circuits to serve a myriad of applications in sensing and communication. To address this…

CMOS-compatible short- and mid-wave infrared emitters are highly coveted for the monolithic integration of silicon-based photonic and electronic integrated circuits to serve a myriad of applications in sensing and communications. In this…

This study presents an optimized hybrid design integrating a distributed Bragg reflector (DBR) and a TiO2 nanocylinder metasurface to enhance light extraction efficiency (LEE) and beam directionality(narrow divergence angle) in…

Low threshold lasers realized within compact, high quality optical cavities enable a variety of nanophotonics applications. Gallium nitride (GaN) materials containing indium gallium nitride (InGaN) quantum dots and quantum wells offer an…