相关论文: Nanoparticle doping as a way to enhance holmium fi…
We developed a new holmium-doped triple-clad fiber (Ho-3CF), reducing the clad diameter to improve the overlap between pump and doped-core, and the holmium concentration to reduce the influence of ion clustering on the laser efficiency. We…
We report on our realization of a high power holmium doped fiber laser, together with the validation of our numerical simulation of the laser. We first present the rare absolute measurements of the physical parameters that are mandatory to…
A new setup for doping helium nanodroplets by means of laser ablation at kilohertz repetition rate is presented. The doping process is characterized and two distinct regimes of laser ablation are identified. The setup is shown to be…
Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured. High doping…
We report the design and experimental and simulated performance for a 2050 nm band fiber amplifier with high optical-optical slope efficiency and low ion pairing, using a novel high performance single clad Ho-doped fiber from the Naval…
Inhomogeneously doped thermoelectric nanomaterials with a delta-function electronic density of states can operate with Carnot efficiency in the absence of phonon heat leaks. Here we self-consistently calculate the efficiency and power from…
In this work, nonlinear optical properties of Na: ZnO thin films (Na: ZnO) have been experimentally elaborated. The principal possibility to operate the nonlinear optical features using external laser beams is shown. The Na: ZnO films were…
Random lasers are based on disordered materials with optical gain. These devices can exhibit either intensity or resonant feedback, relying on diffusive or interference behaviour of light, respectively, which leads to either coupling or…
Along a single strand of micro-capillary optical waveguide, we achieved an efficient transfer of the light momentum onto the liquid contained there within, successfully atomizing it into nanoscale droplets. A hollow optical fiber (HOF),…
Structured-core thulium-doped fibers were developed to reduce heat load, enable shorter-wavelength operation, and achieve a pedestal-free design. In a proof-of-principle experiment, laser slope efficiencies of 52% at 1907 nm and 54% at 1940…
Doping of semiconductors by impurity atoms enabled their widespread technological application in micro and opto-electronics. For colloidal semiconductor nanocrystals, an emerging family of materials where size, composition and shape-control…
We show that the optical and electronic properties of nanocrystalline silicon can be efficiently tuned using impurity doping. In particular, we give evidence, by means of ab-initio calculations, that by properly controlling the doping with…
Secondary Ions Mass Spectroscopy and Hall effect measurements were performed on boron doped silicon with concentration between 0.02 at.% and 12 at.%. Ultra-high boron doping was made by saturating the chemisorption sites of a Si wafer with…
Pulsed laser-deposited amorphous carbon nanofoams are potential candidate for electrochemical energy storage applications due to ultra-light weight, large volumetric void fractions, and co-existence of sp, sp2 and sp3 carbon hybridization.…
Crystalline Si substrates are doped by laser annealing of solution processed Si. For this experiment, dispersions of highly B-doped Si nanoparticles (NPs) are deposited onto intrinsic Si and laser processed using an 807.5nm cw-laser. During…
Hyperdoping, overcoming the solubility limit of dopants in a crystalline semiconductor, is a fertile method for the enhancement of the electrical, structural and optical devices' performances and for the exploration of exotic phases such as…
Rare-earth-doped fiber lasers are emerging as promising high-power mid-infrared sources for the 2.6-3.0 {\mu}m and 3.3-3.8 {\mu}m regions based on erbium and holmium ions. The intermediate wavelength range, however, remains vastly…
High Power Targetry (HPT) R&D is critical in the context of increasing beam intensity and energy for next generation accelerators. Many target concepts and novel materials are being developed and tested for their ability to withstand…
Herein, a self-assembled hierarchical structure of hematite ($\alpha$-$Fe_2O_3$) was synthesized via a one-pot hydrothermal method. Subsequently, the nanomaterial was doped to get $M_{x}Fe_{2-x}O_3$ (M = Mn-Co; x = 0.01, 0.05, 0.1) at…
Lithium niobate, LiNbO3, is an important technological material with good electro-optic, acousto-optic, elasto-optic, piezoelectric and nonlinear properties. Doping LiNbO3 with hafnium, Hf has been shown to improve the resistance of the…