相关论文: Re-assembly and test of a COMB dipole magnet with …

This paper reports progress in the development of COMB magnet technology with STAR wires. A two-layer dipole magnet with 60 mm clear bore has been recently fabricated and tested in liquid nitrogen. The purpose of the test was to determine…

Rare Earth Barium Copper Oxide (REBCO) coated conductors (CCs) have emerged for future high field magnets in fields and temperatures inaccessible for Nb based superconductors. However, their exceptionally high current densities pose…

The REBCO coated conductor has the potential to be widely used in ultrahigh field magnets. It is well known, however, that it is not mechanically strong against delamination in the direction normal to its surface due to its intrinsic…

High-field superconducting magnets with a dipole field of 16 T and above enable future energy-frontier circular particle colliders. Although we believe these magnets can be built, none exists today. They can also be a showstopper for future…

Rare-earth-barium-copper-oxide (REBCO) tapes are now available from several industrial manufacturers and are very promising conductors in high field applications. Due to diverging materials and deposition processes, these manufacturers'…

Particle accelerators with superconducting magnets operating at cryogenic temperatures use a beam screen (BS) liner that extracts heat generated by the circulating bunched charge particle beam before it can reach the magnets. The BS…

We present a concept of the rapid-cycling 1.7 T ReBCO magnet for 1 to 10 kT/s ramping range as required for muon acceleration in a future muon collider presently under study. This approach is based on the 6 kA CORC-like cable constructed…

REBCO tape has successfully used in ultra-high field magnets. Mechanically, it is very strong in its length direction but is prone to delamination in the thickness direction. In an epoxy impregnated REBCO magnet, thermal strain alone could…

Delamination strength of REBCO is very important for its applications in large magnet projects. This work presented the transmission electron microscopy (TEM) investigation of the microstructures of the REBCO coated conductor to understand…

Superconducting REBCO ($RE$Ba$_2$Cu$_3$O$_{7-x}$, where $RE$ is a rare earth, typically Y, Gd or Eu) electromagnets are useful for many applications like medical magnetic resonace imaging (MRI), nuclear magnetic resonance (NMR)…

Rare earth barium copper oxide (REBCO) coated conductor has emerged as one of the high Tc superconductors suitable for future ultrahigh field superconducting magnet applications. In the design and fabrication of such ultrahigh field REBCO…

Development of REBCO cables that carry high electrical current in high magnetic field is crucial for future large-scale magnet applications. This experimental work presents the critical current measurements of two different REBCO cables by…

A possible application of the HTS (ReBCO) rapid-cycling dipole magnet [1] in the first stages of muon acceleration consisting of Recirculating Linear Accelerator (RLA) and followed-up first Rapid Cycling Synchrotron (RCS-1) is presented.…

REBCO coated conductor has great potential to be used in ultra-high field magnets. Commercial REBCO tapes are strong in the longitudinal direction but prone to delamination by tensile stress in the thickness direction. For high field magnet…

Carbon-doped magnesium diboride was fabricated from pre-reacted pure MgB2 by mechanical alloying. The sample set had excellent critical current densities Jc(8T,4.2K) ranging from 15-60 kA/cm2, depending on composition. Magneto-optical…

We report experiments on a superconducting spin switch based on technologically relevant materials as elemental ferromagnetic Co and elemental superconducting Nb. The Co/Nb/Co structure exhibits inverse spin switch effect, can be operated…

To explore the limits of layer wound (RE)Ba2Cu3O7-x (REBCO, RE = Rare Earth) coils in a high magnetic field environment > 30 T, a series of small insert coils have been built and characterized in background fields. One of the coils…

Due to the issues associated with rare-earth elements, there arises a strong need for magnets with properties between those of ferrites and rare-earth magnets that could substitute the latter in selected applications. Here, we produce a…

This course introduces key aspects of superconducting magnet technology in accelerators: basic principles, superconducting materials (NbTi, Nb$_3$Sn, ReBCO), wire and cable architectures, and fabrication methods. Compared to copper or…

CORC$^\circledR$ wires are a promising superconductor for accelerator magnet applications. While their excellent uniaxial tensile properties have been well established, potential degradation under transverse compression remains a…