相关论文: A Unified Fault Ride Through Technique for Virtual…
Virtual Oscillator (VO) control is the latest and promising control technique for grid-forming and grid-supporting inverters. VO Controllers (VOCs) provide time-domain synchronization with a connected electrical network. At the same time, a…
Unified virtual oscillator controller (uVOC) inherits the rigorous analytical foundation offered by oscillator based grid-forming (GFM) controllers and enables fast over-current limiting and fault ride-through (FRT). Control design for…
A unified virtual oscillator controller (uVOC) is proposed, which enables a unified analysis, design, and implementation framework for both grid-forming (GFM) and grid-following (GFL) voltage source converters (VSCs). Oscillator based GFM…
Virtual oscillator control is the latest control technique for grid-forming inverters. Virtual Oscillator based Controllers (VOCs) provide all the steady-state droop functionalities of conventional droop controllers and, in addition, the…
Recent research has shown that operating grid-connected converters using the grid-forming vector current control (GFVCC) scheme offers significant benefits, including the simplicity and modularity of the control architecture, as well as…
During grid faults, grid-forming converters are typically suggested to switch from a voltage-source to a current-source mode to limit the current and protect the electronics. This transition has the potential for the converter to…
Modern power systems increasingly demand converter-driven generation systems that integrate seamlessly with grid infrastructure. Grid-based converters are particularly advantageous, as they operate in harmony with conventional synchronous…
Complex droop control, alternatively known as dispatchable virtual oscillator control (dVOC), stands out for its unique capabilities in synchronization and voltage stabilization among existing control strategies for grid-forming converters.…
The renewable energy is connected to the power grid through power electronic converters, which are lack of make the inertia of synchronous generator/machine (SM) be lost. The increasing penetration of renewable energy in power system…
Inspired by the kinetics of wave phenomena in reaction-diffusion models of biological systems, we propose a novel grid-forming control strategy for control of three-phase DC/AC converters in power systems. The ($\lambda-\omega$) virtual…
Differing from synchronous generators (SGs), grid-forming inverter-based resources (GFM-IBRs) exhibit rapid variations in their output impedances during transmission line faults due to the overcurrent limitation. As a result, the source…
Data center loads have expanded significantly in recent years. Compared to traditional loads, data centers are highly sensitive to voltage deviations and thus their protection mechanisms trip more proactively during voltage fluctuations.…
In this paper, we investigate the transient stability of a state-of-the-art grid-forming complex-droop control (i.e., dispatchable virtual oscillator control, dVOC) under current saturation. We quantify the saturation level of a converter…
This paper explores the analysis and implementation of the Virtual Oscillator Control (VOC) strategy for inverters aiming to enhance stability amidst the ever-increasing generation of renewable energy sources like solar PV. Key objectives…
This paper presents an analysis and experimental validation of dispatchable virtual oscillator control (dVOC) for inverter-dominated power systems. dVOC is a promising decentralized control strategy that requires only local measurements to…
We consider the problem of grid-forming control of power converters in low-inertia power systems. Starting from an average-switch three-phase inverter model, we draw parallels to a synchronous machine (SM) model and propose a novel…
Grid-connected inverters are required to operate stably under a wide range of grid conditions. However, conventional grid-following (GFL) control may suffer from instability under weak-grid conditions, while grid-forming (GFM) control may…
This article proposes a "cross-forming" control concept for grid-forming inverters operating against grid faults. Cross-forming refers to voltage angle forming and current magnitude forming. It differs from classical grid-forming and…
Volt/var control (VVC) of smart PV inverter is becoming one of the most popular solutions to address the voltage challenges associated with high PV penetration. This work focuses on the local droop VVC recommended by the grid integration…
This paper investigates the design and analysis of a novel grid-forming (GFM) control method for grid-connected converters (GCCs). The core novelty lies in a virtual flux observer-based synchronization and load angle control method. The…