相关论文: Modeling Turbulence in the Atmospheric Boundary La…
We examine large-eddy-simulation modeling approaches and computational performance of two open-source computational fluid dynamics codes for the simulation of atmospheric boundary layer (ABL) flows that are of direct relevance to wind…
Adaptive mesh refinement (AMR) in the high-order spectral-element method code Nek5000 is demonstrated and validated with well-resolved large-eddy simulations (LES) of the flow past a wing profile. In the present work, the flow around a NACA…
Site-specific flow and turbulence information are needed for various practical applications, ranging from aerodynamic/aeroelastic modeling for wind turbine design to optical diffraction calculations. Even though highly desirable, collecting…
The study presents wall-modeled large-eddy simulations (LES) characterizing the flow features of a neutral atmospheric boundary layer over two urban-like roughness geometries: an array of three-dimensional square prisms and the…
In large-eddy simulations, subgrid-scale (SGS) processes are parameterized as a function of filtered grid-scale variables. First-order, algebraic SGS models are based on the eddy-viscosity assumption, which does not always hold for…
The present study gives an overview and emphasizes principal moments of the applications of the turbulence-resolving modeling with large-eddy simulation (LES) numerical technique to planetary boundary layer (PBL) research and climate…
We develop hybrid RANS-LES strategies within the spectral element code Nek5000 based on the $k-\tau$ class of turbulence models. We chose airfoil sections at small flight configurations as our target problem to comprehensively test the…
Climate change necessitates rapid expansion of renewable energy, with wind energy offering a scalable and low-impact solution. However, accurate prediction of wind loads and power generation remains challenging due to uncertainties in wind…
This article analyses the simulation methodology for wall-modeled large-eddy simulations using solvers based on the spectral-element method (SEM). To that end, algebraic wall modeling is implemented in the popular SEM solver Nek5000. It is…
One of the more promising recent approaches to turbulence modelling is the Variational Multiscale Large Eddy Simulation (VMS LES) method proposed by Hughes et al. [Comp. Visual. Sci., vol. 3, pp. 47-59, 2000]. This method avoids several…
A suite of numerical model-derived turbulence assessment products has recently been developed by NESDIS/STAR and implemented on the World Wide Web. The existing product suite is intended to provide turbulence information to aircraft flying…
A recently developed so-called explicit algebraic Reynolds-stress (EARS) model is applied to a transitioning atmospheric boundary layer (ABL). The simulation describes a diurnal cycle with a deep convective ABL during daytime and an…
Large-eddy simulation (LES) of a turbulent flow through an array of building-like obstacles is an idealized model to study transport of contaminants in the urban atmospheric boundary layer (UABL). A reasonably accurate LES prediction of…
We investigate the reconstruction of a turbulent flow field in the atmospheric boundary layer from a time series of lidar measurements, using Large-Eddy Simulations (LES) and a 4D-Var data assimilation algorithm. This leads to an…
An ensemble Kalman filter (EnKF)-based mixed model (EnKF-MM) is proposed for the subgrid-scale (SGS) closure in the large-eddy simulation (LES) of turbulence. The model coefficients are determined through the EnKF-based data assimilation…
We formulate and implement the Euler equations with SGS dynamics and provide numerical tests of an SGS turbulence energy model that predicts the turbulent pressure of unresolved velocity fluctuations and the rate of dissipation for highly…
We developed a novel autonomously dynamic nonlocal turbulence model for the large and very large eddy simulation (LES, VLES) of the homogeneous isotropic turbulent flows (HIT). The model is based on a generalized (integer-to-noninteger)…
A wall-resolved large-eddy simulation (LES) of the fluid flow around a 30P30N airfoil is conducted at a Reynolds number of Rec=750,000 and an angle of attack (AoA) of 9 degrees. The simulation results are validated against experimental data…
This study develops invariance-embedded machine learning sub-grid-scale (SGS) stress models admitting turbulence kinetic energy (TKE) backscatter towards more accurate large eddy simulation (LES) of meso-scale turbulent hurricane boundary…
Observational studies of a planetary boundary layer (PBL) are difficult. Ground-born measurements usually characterize only a small portion of the PBL immediately above the surface. Air-born measurements cannot be obtained close to the…