相关论文: Safe Control of Grid-Interfacing Inverters with Cu…
Grid-interfacing inverters act as the interface between renewable resources and the electric grid, and have the potential to offer fast and programmable controls compared to synchronous generators. With this flexibility there has been…
Grid-interfacing inverters serve as the interface between renewable energy resources and the electric power grid, offering fast, programmable control capabilities. However, their operation is constrained by hardware limitations, such as…
Many resources in the grid connect to power grids via programmable grid-interfacing inverters that can provide grid services and offer greater control flexibility and faster response times compared to synchronous generators. However, the…
Unlike conventional generators, inverter-based generation do not possess any rotational inertia. While grid-forming inverters can synthesize small (virtual) inertia via advanced feedback control loops, additional control mechanisms are…
Converter-based generators and loads are growing in prevalence on power grids across the globe. The rise of these resources necessitates controllers that handle the power electronic devices' strict current limits without jeopardizing…
This paper presents some recent trends in the research of grid-interactive inverters. Particularly, this paper focuses on stability, ancillary services, operation, and security of single and multiple inverters in the modern power grid. A…
Grid-connected inverters are required to operate stably under a wide range of grid conditions. However, conventional grid-following (GFL) control may suffer from instability under weak-grid conditions, while grid-forming (GFM) control may…
Inverter-based resources (IBRs) are becoming increasingly prevalent in power systems. Due to the inherently low inertia of inverters, there is a heightened risk of disruptive voltage oscillations. A particular challenge in the operation of…
The growing integration of inverter-based resources (IBRs) into modern power systems poses significant challenges for maintaining reliable operation under dynamic and constrained conditions. This paper focuses on the power tracking problem…
This article proposes a "cross-forming" control concept for grid-forming inverters operating against grid faults. Cross-forming refers to voltage angle forming and current magnitude forming. It differs from classical grid-forming and…
Grid-forming (GFM) converters face significant challenges in limiting current during transient grid events while preserving their grid-forming behavior. This paper offers an elegant solution to the problem with a priori guarantees,…
This paper presents a sub-switching period current-limiting control for a grid-tied inverter to prevent transient overcurrents during grid faults and enable seamless fault ride-through (FRT). Sudden grid-voltage disturbances, such as…
Grid forming control applied to power converters that interface storage or renewable generation to the power grid, has been identified as a potential solution to facilitate a substantial share of converter-based renewable generation in the…
This paper presents current control method for a grid-connected partial resonant soft switching inverter. This inverter does not use an electrolytic capacitor and is capable of boosting and bucking the voltage. Grid-connected inverters are…
In this work, a non-linear controller designed using non-linear transformation linearization and feedback is proposed for an inverter connected to a weak grid through a single-stage inductive filter. The proposed strategy is…
Smart inverters have been advocated as a fast-responding mechanism for voltage regulation in distribution grids. Nevertheless, optimal inverter coordination can be computationally demanding, and preset local control rules are known to be…
The existing decentralized control for cascaded inverters is based on the assumption that all modules have same capacities, and a local fixed-amplitude-varied-phase voltage control is adopted for each inverter module. However, available…
This paper developed a novel control approach for the sparse and safe frequency regulation for inverter intensive microgrids (MGs). In the scenario, the inverters and external grids are expected to reach a synchronized desired frequency…
The rapid increase of distributed energy resources has led to the widespread deployment of microgrids. These flexible and efficient local energy grids are able to operate in both grid-connected mode and islanded mode; they are interfaced to…
We consider the problem of guaranteeing that the transient voltages and currents stay within prescribed bounds in Direct Current (DC) microgrids, when the controller does not have access to accurate system dynamics due to the load being…