相关论文: Force Myography based Torque Estimation in Human K…
Objective: Muscle contractions are commonly detected by performing EMG measurements. The major disadvantage of this technique is that mechanical disturbances to the electrodes are in the same frequency and magnitude range as the desired…
Surface electromyography (sEMG) is a widely used muscle activity monitoring technique. sEMG measures muscle activity through monopolar and bipolar, multi-electrode electrodes. The surface electrodes are placed on the surface of the skin…
Due to the redundancy of our motor system, movements can be performed in many ways. While multiple motor control strategies can all lead to the desired behavior, they result in different joint and muscle forces. This creates opportunities…
Musculoskeletal models have been widely used for detailed biomechanical analysis to characterise various functional impairments given their ability to estimate movement variables (i.e., muscle forces and joint moment) which cannot be…
Surface electromyography provides a practical way to infer human movement intention from wearable muscle recordings, but models trained under a single acquisition setting often lose reliability when the user, session, electrode layout, or…
Accurate parameter identification of a subject-specific human musculoskeletal model is crucial to the development of safe and reliable physically collaborative robotic systems, for instance, assistive exoskeletons. Electromyography…
Partial hand amputations significantly affect the physical and psychosocial well-being of individuals, yet intuitive control of externally powered prostheses remains an open challenge. To address this gap, we developed a force-controlled…
This paper proposes a novel contact and wearable sensing system for estimating the upper body posture and joint angles (ankle, knee, and hip) of the human body using foot pressure distribution information obtained from a sensor attached to…
Designing generalizable control policies for lower-limb exoskeletons remains fundamentally constrained by exhaustive data collection or iterative optimization procedures, which limit accessibility to clinical populations. To address this…
In the control of lower-limb exoskeletons with feet, the phase in the gait cycle can be identified by monitoring the weight distribution at the feet. This phase information can be used in the exoskeleton's controller to compensate the…
Background: Lower limb exoskeletons can enhance quality of life, but widespread adoption is limited by the lack of frameworks to assess their biomechanical and human-robot interaction effects, which are essential for developing adaptive and…
In this paper, we present an integrated human-in-the-loop simulation paradigm for the design and evaluation of a lower extremity exoskeleton that is elastically strapped onto human lower limbs. The exoskeleton has 3 rotational DOFs on each…
Muscle contraction is often detected via EMG in prosthetics. However, signal disturbances due to electrode motions can lead to misinterpretations. Therefore, alternative measurement approaches are desired to increase the reliability of the…
Human-like motion is a primary goal for many robotic assistive devices. Emulating the strategy of the human neuromuscular system may aid the control of such powered devices, yet many challenges remain. In this study, we investigated the…
To enhance lifting-load estimation accuracy in industrial upper-limb assistive exoskeletons, this study proposes a machine learning-based approach using insole pressure sensors. Unlike traditional methods that rely on electromyography…
Positive biomechanical outcomes have been reported with lower-limb exoskeletons in laboratory settings, but these devices have difficulty delivering appropriate assistance in synchrony with human gait as the task or rate of phase…
Robot-assisted rehabilitation offers an effective approach, wherein exoskeletons adapt to users' needs and provide personalized assistance. However, to deliver such assistance, accurate prediction of the user's joint torques is essential.…
Predicting lower limb motion intent is vital for controlling exoskeleton robots and prosthetic limbs. Surface electromyography (sEMG) attracts increasing attention in recent years as it enables ahead-of-time prediction of motion intentions…
This paper presents a novel approach to evaluating back support exoskeletons (BSEs) in workplace settings addressing the limitations of traditional methods like electromyography (EMG), which are impractical due to their sensitivity to…
The estimation of external joint torque and contact wrench is essential for achieving stable locomotion of humanoids and safety-oriented robots. Although the contact wrench on the foot of humanoids can be measured using a force-torque…