相关论文: Including the vacuum energy in stellarator coil de…
Design and modeling of a stellarator fusion reactor is a multidisciplinary effort that requires a tight integration between simulation of highly nonlinear multi-physics and representation of non-planar complex geometries. The critical…
Magnetic confinement devices for nuclear fusion can be large and expensive. Compact stellarators are promising candidates for costreduction, but introduce new difficulties: confinement in smaller volumes requires higher magnetic field,…
Finding an easy-to-build coils set has been a critical issue for stellarator design for decades. Conventional approaches assume a toroidal "winding" surface. We'll investigate if the existence of winding surface unnecessarily constrains the…
The reduction of magnetic forces on electromagnetic coils is an important consideration in the design of high-field devices such as the stellarator or tokamak. Unfortunately, these forces may be too time-consuming to evaluate by…
A central issue in the design of tokamaks or stellarators is the coils that produce the external magnetic fields. The freedom that remains unstudied in the design of coils is enormous. This freedom could be quickly studied computationally…
This paper describes a new and efficient method of defining an annular region of a curl-free magnetic field with specific physics and coil properties that can be used in stellarator design. Three statements define the importance: (1) Codes…
Designing magnets for three-dimensional plasma confinement is a key task for advancing the stellarator as a fusion reactor concept. Stellarator magnets must produce an accurate field while leaving adequate room for other components and…
Stellarator plasmas are externally controlled to a degree unparalleled by any other fusion concept, magnetic or inertial. This control is largely through the magnetic fields produced by external coils. The development of fusion energy could…
In this work, we utilize new coil objectives for stellarator optimization with autodifferentiation, including pointwise and net coil-coil forces and torques. We use these methods to perform the first large-scale optimization of planar…
We consider the novel problem of optimizing a large set of passive superconducting coils (PSCs) with currents induced by a background magnetic field rather than power supplies. In the nuclear fusion literature, such coils have been proposed…
We draw attention to an interesting possibility in the design and operation of stellarator fusion reactors, which has hitherto been considered unrealistic under burning-plasma conditions. Thanks to recent advances in stellarator…
Stellarators confine fusion plasmas using three-dimensional magnetic fields composed of nested toroidal magnetic surfaces. In generic stellarators, trapped particles can drift across these surfaces and degrade plasma confinement. Certain…
A new Lagrangian formulation with complex currents is developed and yields a direct and simple method for modeling three-phase permanent-magnet and induction machines. The Lagrangian is the sum a mechanical one and of a magnetic one. This…
Finding feasible coils for stellarator fusion devices is a critical challenge of realizing this concept for future power plants. Current design efforts struggle to navigate the highly nonconvex optimization landscape, spend considerable…
The problem of finding an optimal curve for the target magnetic axis of a stellarator is addressed. Euler-Lagrange equations are derived for finite length three-dimensional curves that extremise their bending energy while yielding fixed…
It is shown that the magnetic-field coils of a stellarator can, at least in principle, be substantially simplified by the use of permanent magnets. Such magnets cannot create toroidal magnetic flux but they can be used to shape the plasma…
We have developed a fast method to design perpendicular permanent magnets for simplifying stellarator coils based on existing codes. Coil complexity is one of the main challenges for stellarators. To date, only electromagnetic coils have…
In recent years many efforts have been undertaken to simplify coil designs for stellarators due to the difficulties in fabricating non-planar coils. The FOCUS code removes the need for a winding surface and represents the coils as arbitrary…
In stellarators, achieving effective divertor configurations is challenging due to the three-dimensional nature of the magnetic fields, which often leads to chaotic field lines and fuzzy separatrices. This work presents a novel approach to…
In fusion reactor design, steels under consideration for the blanket are ferromagnetic, so the steel's effect on the plasma physics must be examined. For efficient calculation of these fields, we can exploit the fact that the magnetic…