相关论文: Cavity Formation in Silica-Filled Rubber Compounds…
The practical strength of oxide glasses is greatly reduced by surface flaws that form during processing and use. Instrumented indentation can mimic such real-life damage events and induce flaws and cracking under controlled conditions. At…
Polymer composite materials are widely used for their exceptional mechanical properties, notably their ability to resist large deformations. Here we examine the failure stress and strain of rubbers reinforced by varying amounts of…
The low elastic modulus of soft materials, combined with geometric nonlinearity and rate dependence, presents significant challenges in the characterization of their mechanical response. We introduce a novel method for measuring the…
The evolution of the polymer structure during nanocomposite formation and annealing of silica-latex nanocomposites is studied using contrast-variation small angle neutron scattering. The experimental system is made of silica nanoparticles…
A study of the reinforcement effect of a soft polymer matrix by hard nanometric filler particles is presented. In the main part of this article, the structure of the silica filler in the matrix is studied by Small Angle Neutron Scattering…
We investigate the reflectivity and optical scattering characteristics at 1064\,nm of an antireflection coated fused silica window of the type being used in the Advanced LIGO gravitational-wave detectors. Reflectivity is measured in the…
Simplified silica (Zeosil 1165 MP) and SBR (140k carrying silanol end-groups) nanocomposites have been formulated by mixing of a reduced number of ingredients with respect to industrial applications. The thermo-mechanical history of the…
Quantitative density measurements from electron scattering show that shear bands in deformed Al_{88}Y_{7}Fe_{5} metallic glass exhibit alternating high and low density regions, ranging from -9 % to +6 % relative to the un-deformed matrix.…
We present results from the SPring-8 Angstrom Compact free electron LAser (SACLA) XFEL facility, using a high intensity ($\sim\!10^{20}\,$W/cm$^2$) X-ray pump X-ray probe scheme to observe changes in the ionic structure of silicon induced…
It has long been thought that shear band (SB) formation in amorphous solids initiates from relatively 'soft' regions in the material in which large-scale non-affine deformations become localized. The test of this hypothesis requires an…
Understanding and mitigating the failure of reinforced elastomers has been a long-standing challenge in many industrial applications. In an early attempt to shed light on the fundamental mechanisms of failure, Gent and Park presented a…
Entangled polymers are deformed by a strong shear flow. The shape of the polymer, called the form factor, is measured by small angle neutron scattering. However, the real-space molecular structure is not directly available from the…
Elastomers saturated with gas at high pressure suffer from cavity nucleation, inflation, and deflation upon rapid or explosive de-compression. Although this process often results in undetectable changes in appearance, it causes internal…
The mechanical response of rubbers has been ubiquitously assumed to be only a function of the imposed strain. Using innovative X-ray measurements capturing the three-dimensional spatial volumetric strain fields, we demonstrate that rubbers…
Change in the interatomic spacing of a two-atom system under tension and compression has been modelled by the elastic deformation of atoms. The critical elastic strain of atoms before separation or cracking from tension was estimated by the…
Nearly three decades ago, the field of mechanics was cautioned of the obscure nature of cavitation processes in soft materials [Gent, A.N., 1990. Cavitation in rubber: a cautionary tale. Rubber Chemistry and Technology, 63(3)]. Since then,…
The linewidth of longitudinal acoustic waves in densified silica glass is obtained by inelastic x-ray scattering. It increases with a high power alpha of the frequency up to a crossover where the waves experience strong scattering. We find…
This paper reports on the frictional properties of smooth rubber substrates sliding against rigid surfaces covered with various densities of colloidal nano-particles (average diameter 77 nm). Friction experiments were carried out using a…
Cavitation is a common damage mechanism in soft solids. Here, we study this using a phase-separation technique in stretched, elastic solids to controllably nucleate and grow small cavities by several orders of magnitude. The ability to make…
We present experimental and theoretical results for the surface topography of a plastically deformed metallic (aluminum) block. When a hard spherical body (here a steel-, silica glass- or silicon nitride ball) with a smooth surface is…