相关论文: High power GaSb-based distributed feedback laser w…

The combination of grating-based frequency-selective optical feedback mechanisms, such as distributed feedback (DFB) or distributed Bragg reflector (DBR) structures, with quantum dot (QD) gain materials is a main approach towards…

We demonstrate a combination of optical and electronic feedback that significantly narrows the linewidth of distributed Bragg reflector lasers (DBRs). We use optical feedback from a long external fiber path to reduce the high-frequency…

InAs/GaAs quantum dot (QD) distributed feedback (DFB) lasers are promising candidates for next-generation photonic integrated circuits. We present a design that incorporates an oxidized aperture confined surface grating (OASG) structure,…

We report on the efficacy of a novel design for dielectric laser accelerators by adding a distributed Bragg reflector (DBR) to a dual pillar grating accelerating structure. This mimics a double-sided laser illumination, resulting in an…

We present the first demonstration of a 1550 nm multi-wavelength distributed feedback (MW-DFB) laser employing a third-order, four-phase-shifted sampled sidewall grating. By utilizing linearly chirped sampled gratings and incorporating…

Sub-wavelength dielectric gratings (SWG) have emerged recently as a promising alternative to distributed-Bragg-reflection (DBR) dielectric stacks for broadband, high-reflectivity filtering applications. A SWG structure composed of a single…

We propose a degenerate version of the Bragg condition, associated to a degenerate band edge (DBE). A standard Bragg condition can be implemented using a periodic grating that operates at the regular band edge. The structure we propose to…

Quasi-bound states in the continuum (q-BICs) enable low-threshold lasing through high-Q cavity modes, yet their polarization tunability remains constrained by nanostructure-imposed cavity symmetries. By engineering a microcavity with an…

We advance the concept of degenerate distributed feedback (DDFB) lasing in a double grating photonic structure that operates near a degenerate band edge (DBE) to achieve a robust single-frequency lasing regime. The DBE is an exceptional…

This study proposes and experimentally demonstrates a distributed feedback (DFB) laser with a distributed phase shift (DPS) region at the center of the DFB cavity. By modeling the field intensity distribution in the cavity and the output…

A fiber Bragg grating (FBG) with an inverse-Gaussian apodization function is proposed and fabricated. It is shown that such a FBG possesses easily controllable dual-wavelength narrow transmission peaks. Incorporating such a FBG filter in a…

We have developed low-dispersion (1480 l/mm), resonance-free, diffraction gratings made of dielectric materials resistant to femtosecond laser damage $(SiO_{2}/HfO_{2})$. A 14 cm diameter sample was fabricated resulting in a mean…

Time-distributed optical feedback in semiconductor lasers has gained attention for its ability to produce high-quality chaos and effectively suppress the time-delay signature. However, the fundamental impact of the distribution of feedback…

We report on the design, realization and characterization of optically pumped micropillar lasers with low-absorbing Al$_{0.2}$Ga$_{0.8}$As/Al$_{0.9}$Ga$_{0.1}$As dielectric Bragg reflectors (DBRs) instead of commonly used GaAs/AlGaAs DBRs.…

We discuss the feasibility of a soft-x-ray distributed feedback laser (DFL) pumped by an x-ray free electron laser (X-FEL). The DFL under consideration is a Mg/SiC bi-layered Bragg reflector pumped by a single X-FEL bunch at 57.4 eV,…

We present a scheme to phase-lock a 240 mW, 852 nm distributed Bragg reflector (DBR) laser to a fixed-frequency narrow-linewidth laser with a rapidly tunable frequency offset near 9 GHz. The phase-lock is accomplished by electronic feedback…

We present a simple, robust, narrow-linewidth, frequency-doubled semiconductor laser source suitable for laser cooling and repumping of $^9$Be$^+$ ions. A distributed Bragg reflector (DBR) laser diode operating at 626 nm is…

techniques can be considered as an attractive alternative to the often-cumbersome traditional manufacturing routes. With the use of high-power lasers, localized hot zones that are necessary for glass making can be obtained rapidly. For…

We demonstrate a kind of grating coupler that generates high quality flat-top beam with a small beamwidth from photonic integrated circuits into free-space. The grating coupler is designed on a silicon-on-insulator wafer with a 220 nm-thick…

Dielectric laser-driven accelerators (DLAs) can provide high accelerating gradients in the GV/m range due to their having higher breakdown thresholds than metals, which opens the way for the miniaturization of the next generation of…