相关论文: Distinguishing Carrier Transport and Interfacial R…

A lead-free, completely inorganic, and non-toxic Cs2TiBr6-based double perovskite solar cell (PSC) was simulated via SCAPS 1-D. La-doped BaSnO3 (LBSO) was applied as the electron transport layer (ETL) unprecedentedly in the simulation study…

Due to their exceptional photovoltaic properties, metal halide perovskites (MHPs) are extensively studied for their potential applications in solar cells. In recent years, the power conversion efficiencies of MHPs-based solar cells rapidly…

We systematically investigate PM6:Y12 bulk-heterojunction solar cells with donor fractions ranging from 1% to 45%, linking morphology, charge transport, and recombination to device performance. Complementary structural and spectroscopic…

The ideality factor determined by measuring the open circuit voltage (VOC) as function of light intensity is often used as a means to identify the dominant recombination mechanism in solar cells. However, applying this Suns-VOC technique to…

The incorporation of even small amounts of strontium (Sr) into lead-based quadruple cation hybrid perovskite solar cells results in a systematic increase of the open circuit voltage (Voc) in pin-type perovskite solar cells. We demonstrate…

Quasi-two-dimensional (quasi-2D) metal halide perovskites exhibit rich phase heterogeneity that profoundly influences light-matter interactions and charge transport. However, the fundamental mechanisms governing carrier transfer across…

Tin perovskites are the most promising environmentally friendly alternative to lead perovskites. Among tin perovskites, FASnI3 (CH4N2SnI3) shows optimum band gap, and easy processability. However, the performance of FASnI3 based solar cells…

Four {\pi}-extended phosphoniumfluorene electrolytes ({\pi}-PFEs) are introduced as hole-blocking layers (HBL) in inverted architecture planar perovskite solar cells (PVSCs) with the structure of ITO/PEDOT:PSS/MAPbI3/PCBM/HBL/Ag. The…

Open circuit voltage decay measurements are performed on methylammonium lead iodide (CH3NH3PbI3) perovskite solar cells to investigate the charge carrier recombination dynamics. The measurements are compared to the two reference…

Perovskite thin films hold great promise for optoelectronic applications, such as solar cells and light emitting diodes. A challenge is that defects are unavoidably formed in the material. Thorough understanding of the defect formation and…

In this study, combined DFT, SCAPS-1D, and wxAMPS frameworks are used to investigate the optimized designs of Cs2BiAgI6 double perovskite-based solar cells. The first-principle calculation is employed to investigate the structural…

Mixed-halide based hybrid perovskite semiconductors have attracted tremendous attention as a promising candidate for high efficient photovoltaic and light-emitting devices. However, these advanced perovskite materials may undergo phase…

Interfacial engineering has fueled recent development of p-i-n perovskite solar cells (PSCs), with self-assembled monolayer-based hole-transport layers (SAM-HTLs) enabling almost lossless contacts for solution-processed PSCs, resulting in…

We demonstrate that blending fluorinated molecules in PEDOT:PSS hole transport layers (HTL) induces charge transfers which impact on both charge extraction and photogeneration within organic photovoltaic (OPV) devices. OPVs fabricated with…

Transient opto-electrical measurements of methylammonium lead iodide (MALI) perovskite solar cells (PSCs) are performed and analyzed in order to elucidate the operating mechanisms. The current response to a light pulse or voltage pulse…

While perovskite solar cells (PSCs) are now reaching high power conversion efficiencies (PCEs), further performance improvement requires a fine management and an optimization of the light pathway and harvesting in the cells. These go…

The high performance of hybrid perovskite based devices is attributed to its excellent bulk-transport properties. However, carrier dynamics, especially at the metal-perovskite interface, and its influence on device operation are not widely…

In this study, the optoelectronic properties of a monolithically integrated series-connected tandem solar cell are simulated. Following the large success of hybrid organic-inorganic perovskites, which have recently demonstrated large…

Hysteresis in the current-voltage characteristics of hybrid organic-inorganic perovskite-based solar cells is one of the fundamental aspects of these cells that we do not understand well. One possible cause, suggested for the hysteresis, is…

Perovskite Solar Cells (PSCs) have garnered global research interest owing to their superior photovoltaic (PV) performance. The future of photovoltaic technology lies in PSCs since they can produce power with performance on par with the…