相关论文: Using Modularized Pin Ridge Filter in Proton FLASH…
A liquid isooctane (C$_{8}$H$_{18}$) filled ionization linear array for radiotherapy quality assurance has been designed, built and tested. The detector consists of 128 pixels, each of them with an area of 1.7 mm $\times$ 1.7 mm and a gap…
Purpose: To evaluate automated multicriteria optimization (MCO)-- designed for intensity modulated radiation therapy (IMRT), but invoked with limited segmentation -- to efficiently produce high quality 3D conformal treatment (3D-CRT) plans.…
The TOP-IMPLART project consists of the design and implementation of a linear proton accelerator, its control and monitoring systems for the treatment of superficial and semi-deep tumors. The energy of 150 MeV (corresponding to a…
The field of exoplanet research is moving towards the detection and characterization of habitable planets. These exo-Earths can be easily found around low-mass stars by using either photometric transit or radial-velocity (RV) techniques. In…
We are developing the Laser Guide Star Adaptive Optics (LGS/AO188) system for the Subaru Telescope at Mauna Kea, Hawaii. This system utilizes a combination of an all-solid-state mode-locked sum-frequency generation (SFG) laser (1.7-GHz…
We have developed a linearly-polarized Ytterbium-doped fiber ring laser with single longitudinal-mode output at 1064nm for LISA and other space applications. Single longitudinal-mode selection was achieved by using a fiber Bragg grating…
Next-generation data networks need to support Tb/s rates. In-phase and quadrature (IQ) modulation combine phase and intensity information to increase the density of encoded data, reduce overall power consumption by minimising the number of…
We report the design and characterization of a high performance integrated arbitrary filter from 1450 nm to 1640 nm. The filter's target spectrum is chosen to suppress the night-sky OH emission lines, which is critical for ground-based…
The platinum/iridium (Pt/Ir) alloy tip for scanning probe microscopy (SPM) was fabricated by amplitude-modulated alternating-current (AC) electropolishing. The clean tips with a radius of curvature less than 100 nm were reproducibly…
The purpose of this study was to investigate the feasibility of extracting proton beams with two distinct energies within a single synchrotron cycle. The energy difference between the beams should be sufficient to use one beam as a range…
Over the last two decades, spatial light modulators (SLMs) have revolutionised our ability to shape optical fields. They grant independent dynamic control over thousands of degrees-of-freedom within a single light beam. In this work we test…
Laser powder bed fusion (L-PBF) is a widely recognized additive manufacturing technology for producing intricate metal components with exceptional accuracy. A key challenge in L-PBF is the formation of complex microstructures affecting…
A compact adjustable focusing system for a 2 MeV H- RFQ Linac is designed, constructed and tested based on four permanent magnet quadrupoles (PMQ). A PMQ model is realised using finite element simulations, providing an integrated field…
Fourier ptychographic microscopy (FPM) is a powerful computational imaging modality that achieves high space-bandwidth product imaging for biomedical samples. However, its adoption is limited by slow data acquisition due to the need for…
The energy recovery linac test facility (ERL-TF), a compact ERL-FEL (free electron laser) two-purpose machine, was proposed at the Institute of High Energy Physics, Beijing. As one important component of the ERL-TF, the photo-injector…
Nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) suffer from inherently low sensitivity due to the weak thermal polarization of nuclear spins. Parahydrogen-induced polarization (PHIP) offers a powerful route to enhance…
A concept for continuously tunable titanium-sapphire (Ti:Sa) lasers using dispersion prisms is under investigation for the ARIEL (Advanced Rare IsotopE Laboratory) laser ion source at TRIUMF (Canada's particle accelerator center).…
The performance of adaptive optics systems employing sodium laser guide stars can be improved by continuously monitoring the vertical density structure of mesospheric sodium along the line of sight. We demonstrate that sodium density…
Purpose To alleviate the spatial encoding limitations of single-shot EPI by developing multi-shot segmented EPI for ultra-high-resolution fMRI with reduced ghosting artifacts from subject motion and respiration. Methods Segmented EPI can…
Meeting the ever increasing demand for transmission capacity in wireless networks will require evolving towards higher regions in the radiofrequency spectrum, reducing cell sizes as well as resorting to more compact, agile and power…