相关论文: Characterization of a Longwave HgCdTe GeoSnap Dete…
New mid-infrared HgCdTe (MCT) detector arrays developed in collaboration with Teledyne Imaging Sensors (TIS) have paved the way for improved 10-$\mu$m sensors for space- and ground-based observatories. Building on the successful development…
The Teledyne COSMOS-66 is a next-generation CMOS camera designed for astronomical imaging, featuring a large-format sensor ($8120 \times 8120$ pixels, each $10 \mu m$), high quantum efficiency, high frame rates, and a correlated…
Building on the successful development of the 10 $\mu m$ HgCdTe detector arrays for the proposed NEOCam mission, the University of Rochester Infrared Detector team and Teledyne Imaging Systems are working together to extend the cutoff…
We introduce the Michigan Infrared Test Thermal ELT N-band (MITTEN) Cryostat, a new facility for testing infrared detectors with a focus on mid-infrared (MIR) wavelengths (8-13 microns). New generations of large format, deep well, fast…
Photodetectors at telecommunications-band with high efficiency and high speed are becoming increasingly important as the booming of big data, 5G, internet of things, cloud computing, artificial intelligence and relevent applications.…
The SuperNova/Acceleration Probe (SNAP) will measure precisely the cosmological expansion history over both the acceleration and deceleration epochs and thereby constrain the nature of the dark energy that dominates our universe today. The…
We describe a high resolution imaging detector based on a single 80 mm micro-channel-plate (MCP) and a phosphor screen mounted on a UHV flange of only 100 mm inner diameter. It relies on standard components and we describe its performance…
We achieve high detectivity terahertz sensing using a silicon nitride nanomechanical resonator functionalized with a metasurface absorber. High performances are achieved by striking a fine balance between the frequency stability of the…
Low-Gain Avalanche Diode (LGAD) sensor is one of candidate sensors for the tracker at future hadron collider experiments. To use this sensor as a tracking detector, AC-LGAD sensor is being developed which has both timing and spatial…
A few-micron thick structure that shows nearly 100% resonant polarized absorptance at a predefined midinfrared wavelength is designed and simulated. Like resonant-cavity enhanced photodetector structure, it contains a thin absorber enclosed…
MOSFIRE is a new multi-object near-infrared spectrometer for the Keck 1 telescope with a spectral resolving power of R 3500 for a 0.7" slit (2.9 pixels). The detector is a substrate-removed 2K x 2K HAWAII 2-RG HgCdTe array from Teledyne…
The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the signals seen on the electrodes surrounding the impact point,…
Spectroscopy of Earth-like exoplanets and ultra-faint galaxies are priority science cases for the coming decades. Here, broadband source flux rates are measured in photons per square meter per hour, imposing extreme demands on detector…
We have embarked on a survey for pulsars and fast transients using the 13-beam Multibeam receiver on the Parkes radio telescope. Installation of a digital backend allows us to record 400 MHz of bandwidth for each beam, split into 1024…
Random telegraph noise (RTN) is a major contributor to read noise in many CMOS image sensors considered for astronomical use. While scientific CMOS image sensors deliver lower read noise than traditional charge-coupled devices, mitigating…
Superconducting radiation detectors typically exhibit detection and single photon sensitivity limited to the mid infrared wavelength range. Extending their detection capabilities into the far infrared range (>10 um) requires careful…
The gravitational waveform of merging binary neutron stars encodes information about extreme states of matter. Probing these gravitational emissions requires the gravitational-wave detectors to have high sensitivity above 1 kHz. Fortunately…
Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR)…
The pCam6060 photodetecting system was developed at SAO RAS and is based on the GSENSE6060BSI photodetector manufactured by GPixel (China) with a frame format of 6144x6144 active pixels and a pixel size of 10 mkm. The readout speed reached…
The development of CdZnTe detectors with an orthogpnal coplanar anode structure has important implications for future astrophysical instrumentation. As electron-only devices, like pixel detectors, coplanar anode strip detectors can be…