相关论文: Fabrication and characterization of optical nanofi…

We experimentally demonstrate the fabrication of optical micro/nanofibers (MNFs) using chemical etching and gas-flame techniques. In the chemical etching technique, a two-step process involves 40% and 24% of hydrofluoric acid solutions for…

We demonstrate the channeling of fluorescence photons from quantum dots (QDs) into guided modes of an optical nanofiber tip (ONFT). We deposit QDs on the ONFT using micro/nano fluidic technology. We measure the photon-counting and emission…

We experimentally demonstrate the in-situ characterization of optical micro/nano fibers (MNFs).The MNF (test fiber, TF) is positioned on a microfiber (probe fiber, PF) and simulated for the scattering loss at various PF and TF diameters.…

An original optical tweezers using one or two chemically etched fiber nano-tips is developed. We demonstrate optical trapping of 1 micrometer polystyrene spheres at optical powers down to 2 mW. Harmonic trap potentials were found in the…

A nanofiber-based optical tweezer is demonstrated. Trapping is achieved by combining attractive near-field optical gradient forces with repulsive electrostatic forces. Silica-coated Fe$_2$O$_3$ nanospheres of 300 diameter are trapped as…

Tapered optical fibers (nanofibers) whose diameters are smaller than the optical wavelength are very fragile and can be easily destroyed if excessively heated by energy dissipated from the transmitted light. We present a technique for…

Optical nanofibers with subwavelength diameters generate strong evanescent fields, enabling efficient light-matter interactions for optical sensing, spectroscopy, and cold-atom experiments. We report a heat-and-pull system for fabricating…

Optical nanofibers confine light to subwavelength scales, and are of interest for the design, integration, and interconnection of nanophotonic devices. Here we demonstrate high transmission (> 97%) of the first family of excited modes…

Single-mode optical nanofibres are a central component of a broad range of applications and emerging technologies. Their fabrication has been extensively studied over the past decade, but imaging of the final sub-micrometre products has…

We present experimental techniques and results related to the optimization and characterization of our nanofiber-based atom trap [Vetsch et al., Phys. Rev. Lett. 104, 203603 (2010)]. The atoms are confined in an optical lattice which is…

The development of optical nanofibers (ONF) and the study and control of their optical properties when coupling atoms to their electromagnetic modes has opened new possibilities for their use in quantum optics and quantum information…

We present a novel technique for measuring the characteristics of a magneto-optical trap for cold atoms by monitoring the spontaneous emission from trapped atoms coupled into the guided mode of a tapered optical nanofiber. We show that the…

A wavelength-tunable Optical Fiber Tweezer (OFT) based on a Graded Index Multimode Fiber (GIMF) with a flat endface is proposed. It is shown that the design can support a trapping position which is far from the tip of the GIMF compared with…

We present a procedure for reproducibly fabricating ultrahigh transmission optical nanofibers (530 nm diameter and 84 mm stretch) with single-mode transmissions of 99.95 $ \pm$ 0.02%, which represents a loss from tapering of 2.6 $\,\times…

We have used diffraction gratings to simplify the fabrication, and dramatically increase the atomic collection efficiency, of magneto-optical traps using micro-fabricated optics. The atom number enhancement was mainly due to the increased…

We demonstrate that thousands of periodic nano-craters are fabricated on a subwavelength-diameter tapered optical fiber, an optical nanofiber, by irradiating with just a single femtosecond laser pulse. A key aspect of the fabrication is…

A cost effectively method to fabricate nanopores in silicon by only using the conventional wet-etching technique is developed in this research. The main concept of the proposed method is a two-step etching process, including a premier…

We report the fabrication of a 1.2 cm long cavity directly on a nanofiber using femtosecond laser ablation. The cavity modes with finesse value in the range 200-400 can still maintain the transmission between 40-60%, which can enable…

We review the method of producing adiabatic optical micro- and nanofibers using a hydrogen/oxygen flame brushing technique. The flame is scanned along the fiber, which is being simultaneously stretched by two translation stages. The tapered…

Design of a doubly-clamped beam structure capable of localizing mechanical and optical energy at the nanoscale is presented. The optical design is based upon photonic crystal concepts in which patterning of a nanoscale-cross-section beam…