相关论文: Wafer-scale fabrication of evacuated alkali vapor …

Advanced integration technologies greatly enhance the prospects and reliability of practical quantum sensors, atomic clocks, and quantum information technologies. The performance and proliferation of these devices at chip-scale is…

We report the fabrication of alkali-metal vapor cells using femtosecond laser machining. This laser-written vapor-cell (LWVC) technology allows arbitrarily-shaped 3D interior volumes and has potential for integration with photonic…

Microfabricated alkali vapor cells enable the miniaturization of atomic sensors, but require collective wafer-level integration of complex features. In many applications, including magnetometers, gyroscopes, magneto-optical traps, and…

Rydberg-atom electrometry enables highly sensitive electric-field measurements by exploiting the extreme polarizability of Rydberg states in alkali atoms. Millimeter-scale atomic vapor cells can be accurately and economically…

Microfabricated alkali vapor cells are key to enable miniature devices such as atomic clocks and optically pumped magnetometers with reduced size, weight and power. Yet, more versatile fabrication methods are still needed to further expand…

Using a simple and cost-effective water jet process, silicon etch depth limitations are overcome to realize a $6\,$mm deep atomic vapor cell. While the minimum silicon feature size was limited to a $1.5\,$mm width in these first generation…

An electrically-controllable, solid-state, reversible device for sourcing and sinking alkali vapor is presented. When placed inside an alkali vapor cell, both an increase and decrease of the rubidium vapor density by a factor of two are…

A quantum network which consists of several components should ideally work on a single physical platform. Neutral alkali atoms have the potential to be very well suited for this purpose due to their electronic structure which involves long…

We demonstrate a controllable depletion of the nitrogen buffer gas pressure in a micro-machined cesium (Cs) vapor cell from the dynamic heating of an alkali dispenser pill. When the alkali source is laser activated, the gettering compounds…

Many samples of current interest in molecular physics and physical chemistry exist in the liquid phase and are vaporized for the use in gas cells, diffuse gas targets or molecular gas jets. For some of these techniques the large sample…

Here we report on a particular type of RPC that presents up to 99% efficiency for minimum ionizing particles and a very sharp time resolution, below 50 ps sigma in the most optimized conditions. Our 9 cm2 cells, made with glass and metal…

We describe the implementation of a cylindrical T-shaped alkali-vapor cell for laser spectroscopy in the presence of a longitudinal electric field. The two windows are used as two electrodes of the high-voltage assembly, which is made…

We describe and characterize a device for alkali vapor pressure modulation on the 100ms timescale in a single-cell cold atom experiment. Its mechanism is based on optimized heat conduction between a current-modulated alkali dispenser and a…

Rydberg-atom electrometry, as an emerging cutting-edge technology, features high sensitivity, broad bandwidth, calibration-free operation, and beyond. However, until now the key atomic vapor cells used for confining electric field-sensitive…

We report a 100 kHz linewidth for the 1S0 to 3P1 intercombination line of 88Sr atoms at 689nm in a microfabricated 9x14 x4.4 mm3 vapor cell. This puts an upper bound on the residual gas pressure in the vapor cell of 10 mTorr. The…

Atom-light interactions in nano-scale systems hold great promise for novel technologies based on integrated emitters and optical modes. We present the design architecture, construction method, and characterization of an all-glass…

Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively-pumped to ultra-high-vacuum (UHV) to…

This letter reports on the generation of a tunable buffer gas mixture within microfabricated alkali vapor cells. We show that the combination of low-permeation windows with sequential openings of laser-actuated break-seals enables…

We describe a simple strontium vapor cell for laser spectroscopy experiments. Strontium vapor is produced using an electrically heated commercial dispenser source. The sealed cell operates at room temperature, and without a buffer gas or…

We demonstrate the use of electrically contacted vapor cells to switch the transmission of a probe laser. The excitation scheme makes use of electromagnetically induced transparency involving a Rydberg state. The cell fabrication technique…