相关论文: Temperature dependent multi-pulse threshold due to…
We report on detailed in-situ distributed temperature measurements inside a high power fiber amplifier. The deducted thermal load and the TMI-threshold of a commercial LMA fiber with 25 micron core and 400 micron cladding was measured at…
Accurate thermal modeling of Terminal Test Masses (TTMs) is crucial for optimizing the sensitivity of gravitational wave interferometers like Virgo. In fact, in such gravitational wave detectors even minimal laser power absorption can…
The coherence properties of optical emitters in crystals are crucial for quantum technologies and optical frequency metrology. Cooling to sub-kelvin temperatures can markedly enhance coherence, making it important to identify the parameters…
The radiation damage to a silicon photomultiplier (SiPM) set on a satellite orbit increases energy threshold for scintillator detectors. We confirmed that 1 krad of radiation increases the energy threshold by approximately a factor of 10,…
We demonstrate temperature-controlled spectral tunability of a partially-pumped single-wavelength random laser in a solid-state random laser based on DCM (4-dicyanomethylene-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran) doped PMMA…
The potential of bulk black-phosphorus for thermoelectric applications has been experimentally studied. The Seebeck Coefficient (S) has been measured in the temperature range from 300 K to 385 K, finding a value of S = +335 +- 10 uV/K at…
Electric and thermoelectric properties of strictly monolayer MoS$_2$ films, which are grown using a novel micro-cavity based CVD growth technique, have been studied under diverse environmental and annealing conditions. Resistance of a…
In this paper, we investigated the annealing experiments of poly(mercaptopropylmethylsiloxane, PMMS) confined within two types of porous templates (anodic aluminium oxide, AAO, and silica) characterized by different pore diameter, d=…
We introduce a method for cooling atoms in an optical dipole trap using pulse-width modulation (PWM) technique, without reducing the laser power of the dipole trap. The PWM technique involves digital modulation of the trap at a fixed…
A polarization-sensitive optical coherence tomography (PS-OCT) system is able to not only show the structure of samples through the analysis of backscattered light, but is also capable of determining their polarimetric properties. This is…
Order(N) Tight-Binding Molecular Dynamics (TBMD) simulations are performed to investigate the thermal stability of (10,10) metallic Single-Walled Carbon Nanotubes (SWCNT). Periodic boundary conditions (PBC) are applied in axial direction.…
High quality CdS nanowires suspended in air were optically pumped both below and above the lasing threshold. The polarization of the pump laser was varied while emission out of the end facet of the nanowire was monitored in a 'head-on'…
The gain of silicon photomultipliers (SiPMs) increases with bias voltage and decreases with temperature. To operate SiPMs at stable gain, the bias voltage can be adjusted to compensate temperature changes. We have tested this concept with…
Balloon- and space-borne cosmic-ray experiments employ plastic scintillators read out by silicon photomultipliers (SiPMs) to achieve picosecond-level time resolutions for triggering and particle identification. The performance of these…
The conductivity $\sigma$ and carrier density $n$ of the conducting polymer polyaniline were investigated by changing the concentration $x$ of a secondary dopant, meta-cresol. We found that $\sigma$ changes by four orders of magnitude…
We present a measurement of the cosmic microwave background (CMB) lensing potential using 500 deg$^2$ of 150 GHz data from the SPTpol receiver on the South Pole Telescope. The lensing potential is reconstructed with signal-to-noise per mode…
We calculate the thermoelectric power (or thermopower) of many semiconducting single wall carbon nanotubes (s-SWNTs) within a diameter range 0.5-1.5 nm by using the Boltzmann transport formalism combined with an extended tight-binding…
The ultrashort pulse laser operation is crucially defined by engaging explicit modulators. Conventionally, they are laborious to incorporate into an all-fibre design or involve the design of sophisticated cavities. We exploit Thulium-doped…
Laser cooling of solids currently has a temperature floor of 50 - 100 K. We propose a method that could overcome this using defects, such as diamond color centers, with narrow electronic manifolds and bright optical transitions. It exploits…
Wetting and drying phenomena are studied for flexible and semiflexible polymer solutions via coarse-grained molecular dynamics simulations and density functional theory calculations. The study is based on the use of Young's equation for the…