相关论文: Shock consolidation and the corresponding plastici…
Deformation twinning is an important deformation mechanism in a variety of materials, including metals and ceramics. This deformation mechanism is particularly important in low-symmetry hexagonal close-packed (hcp) metals such as Magnesium…
Deformation twinning is a form of permanent deformation that is commonly observed in low symmetry crystals such as hexagonal close-packed (hcp) metals. With recent increased interest in using hcp metals, such as magnesium, in structural,…
Magnesium (Mg) and its alloys hold great potential as an energy-saving structural material for automative, aerospace applications. However, the use of Mg alloys has been limited due to poor ductility and formability. Poor mechanical…
Plastic deformation of metallic alloys usually takes place through slip, but occasionally involves twinning. In particular, twinning is important in hexagonal close packed materials where the easy slip systems are insufficient to…
The paper concerns the nanopowder high-speed, $10^4$ - $10^9$ s${}^{-1}$, compaction processes modeling by a two-dimensional granular dynamics method. Nanoparticles interaction, in addition to known contact laws, included dispersive…
It is well known that the twinning is an important mode of plastic deformation in nanocrystalline materials. As a result, it is expected that the twin can interact with different grain boundaries (GBs) during the plastic deformation.…
Twinning is an important mode of plastic deformation in metallic nanopillars. When twinning occurs on multiple systems, it is possible that twins belonging to different twin systems interact and forms a complex twin-twin junctions.…
We investigate the deformation and failure mechanisms of phosphorene sheet and nanoribbons under uniaxial tensile strain along the zigzag direction using the density functional tight-binding method. Surprisingly, twin-like deformation…
Deformation twinning in pure aluminum has been considered to be a unique property of nanostructured aluminum. A lingering mystery is whether deformation twinning occurs in coarse-grained or single-crystal aluminum, at scales beyond…
Tensile twinning is a main deformation mode in hexagonal close packed structure metals, so it is important to comprehensively understand twinning mechanisms which are not fully disclosed using 2D or small volume 3D characterization…
A Twinning Induced Plasticity (TWIP) steel with a nominal composition of Fe-16.4Mn-0.9C-0.5Si-0.05Nb-0.05V was deformed to an engineering strain of 6\%. The strain around the deformation twins were mapped using the 4D-STEM technique. Strain…
Plasticity in body-centered cubic (BCC) nanocrystals is often associated with twin nucleation phenomena under extreme loading conditions. Here, we reveal unconventional twinning pathways that operate at the intersection of crystal…
At two-thirds the weight of aluminum, magnesium alloys have the potential to significantly reduce the fuel consumption of transportation vehicles. These advancements depend on our ability to optimize the desirable versus undesirable effects…
Plastic deformation mechanisms have been investigated in the MAX phase Ti2AlN. Nanoindentation has been used to induce plastic deformation in a single grain, and a Transmission Electron Microscopy (TEM) lamella has been extracted in cross…
Contraction twinning in magnesium alloys leads to new grains that are misoriented from the parent grain by a rotation of 56 deg around the a-axis. The classical theory of deformation twinning does not precise the atomic displacements and…
A numerical strategy to simulate plastic deformation in Mg alloys including dislocation slip and twin propagation is presented. Dislocation slip is included through a crystal plasticity model which is solved using the finite element method…
Friction and wear of metals are critically influenced by the microstructures of the bodies constituting the tribological contact. Understanding the microstructural evolution taking place over the lifetime of a tribological system therefore…
The impact of twin boundaries (TBs) on the microstructure evolution and plastic deformation mechanisms of face-centered cubic (FCC) metals has been extensively studied since the discovery that nanotwinned materials exhibit a favorable…
Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal…
Reversible hydrogen uptake and the metal/dielectric transition make the Mg/MgH$_2$ system a prime candidate for solid state hydrogen storage and dynamic plasmonics. However, high dehydrogenation temperatures and slow dehydrogenation hamper…