相关论文: Shock consolidation and the corresponding plastici…
In nanocomposite magnetic materials the exchange coupling between phases plays a central role in the determination of the extrinsic magnetic properties of the material: coercive field, remanence magnetization. Exchange coupling is therefore…
Molecular dynamics simulations on tensile deformation of initially defect free single crystal copper nanowire oriented in <001>{100} has been carried out at 10 K under adiabatic and isothermal loading conditions. The tensile behaviour was…
Micromechanical modeling and mechanical properties of polyurethane (PU) hybrid nanocomposite foams with multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were investigated by mean of tensile strength, hardness, impact…
Grain-grain processing has been shown to be an indispensable ingredient of shock modelling in high density environments. For densities higher than \sim10^5 cm-3, shattering becomes a self-enhanced process that imposes severe chemical and…
Mechanical stability of Ag and Cu printed and evaporated metallization lines on polymer substrates is investigated by means of monotonic tensile and cyclic bending tests. It is shown that lines which demonstrate good performance during…
This paper focuses on molecular dynamics (MD) modeling of graphene reinforced cross-linked epoxy (Gr-Ep) nanocomposite. The goal is to study the influence of geometry, and concentration of reinforcing nanographene sheet (NGS) on interfacial…
Understanding the fracture mechanisms in composite materials across scales, from nano- to micro-scales, is essential for an in-depth understanding of the reinforcement mechanisms and designing the next generation of lightweight,…
Gold nanorods grafted with short chain polymers are assembled into controlled open structures using polymer-induced depletion interactions and structurally characterized using small angle x-ray scattering. When the nanorod diameter is…
We present a machine learning based model that can predict the electronic structure of quasi-one-dimensional materials while they are subjected to deformation modes such as torsion and extension/compression. The technique described here…
Discrete element (DEM) simulations demonstrate that granular materials are non-simple, meaning that the incremental stiffness of a granular assembly depends on the gradients of the strain increment as well as on the strain increment itself.…
The shape of metallic constrictions of nanoscopic dimensions (necks) formed using a scanning tunneling microscope (STM) is shown to depend on the fabrication procedure. Submitting the neck to repeated plastic deformation cycles makes…
We present a new material which displays anisotropic and mechanical properties tuneable during synthesis under magnetic field. It is formulated by mixing aqueous suspensions of polymer nanolatex and magnetic nanoparticles, coated by a thin…
Nanocrystalline metals contain a large fraction of high-energy grain boundaries, which may be considered as glassy phases. Consequently, with decreasing grain size, a crossover in the deformation behaviour of nanocrystals to that of…
The recrystallized grain size and texture in alloys can be controlled via the microchemistry state during thermomechanical processing. The influence of concurrent precipitation on recovery and recrystallization is here analyzed by directly…
We consider the process of precipitation in binary alloys in the presence of mechanical deformation. It is commonly observed that mechanical deformation prior to or during precipitation leads to microstructure with excess defects, which…
Nano-structured molybdenum-copper composites have been produced through severe plastic deformation of liquid-metal infiltrated Cu30Mo70 and Cu50Mo50 (wt.%) starting materials. Processing was carried out using high pressure torsion at room…
The high mechanical strength and excellent flexibility of 2D materials such as graphene are some of their most important properties [1]. Good flexibility is key for exploiting 2D materials in many emerging technologies, such as wearable…
Bulk solid state synthesis of nitride materials usually leads to thermodynamically stable, cation-ordered crystal structures, whereas thin film synthesis tends to favor disordered, metastable phases. This dichotomy is inconvenient both for…
Friction Stir Processing is a relatively new technique which has been developed for microstructural modification of metallic materials through intense, localized plastic deformation. The current research work deals with the development of…
We investigate the spatial distribution of spin orientation in magnetic nanoparticles consisting of hard and soft magnetic layers. The nanoparticles are synthesized in a core / shell spherical morphology where the magnetically hard, high…