相关论文: Directional drying of a colloidal dispersion: quan…
In this paper, we study the drying of water-saturated porous polydimethylsiloxane (PDMS) elastomers with closed porosity in which the evaporation of water is possible only via the diffusion across the PDMS. Starting from water/PDMS…
Modification of surfaces to enable dropwise condensation is a promising approach for achieving high condensation rates. In this work, we present an experimental study on condensation of water on copper surfaces coated with an ultrathin, 5…
The shape of deposits obtained from drying drops containing colloidal particles matters for technologies such as inkjet printing, microelectronics and bioassay manufacturing. In this work, the formation of deposits during the drying of…
Polydimethylsiloxane (PDMS) is a glassy polymer widely used in biomedical engineering, namely in microfluidics applications. However, PDMS is known to interact with hydrophobic chemicals. This interaction is exacerbated at the scale of…
We study the stress developed during the drying of a colloidal drop of silica nanoparticles. In particular, we use the wrinkling instability of a thin floating sheet to measure the net stress applied by the deposit on the substrate and we…
Drying suspensions often leave behind complex patterns of particulates, as might be seen in the coffee stains on a table. Here we consider the dynamics of periodic band or uniform solid film formation on a vertical plate suspended partially…
Soft substrates such as polydimethylsiloxane (PDMS) enhance droplet nucleation during the condensation of water vapour, because their deformability inherently reduces the energetic threshold for heterogeneous nucleation relative to rigid…
We present a microfluidic method leading to accurate measurements of the mutual diffusion coefficient of a liquid binary mixture over the whole solute concentration range in a single experiment. This method fully exploits solvent…
We reveal an unreported physical mechanism that enables the pre-concentration, sorting and characterization of charged polystyrene nanobeads and liposomes dispersed in a continuous flow within a straight micron-sized channel. Initially, a…
Unrestricted particle transport through microfluidic channels is of paramount importance to a wide range of applications, including lab-on-a-chip devices. In this article, we study using video microscopy the electro-osmotic aggregation of…
Flexible microfluidics have found extensive utility in the biological and biomedical fields. A leading substrate material for compliant devices is polydimethylsiloxane (PDMS). Despite its many advantages, PDMS is inherently hydrophobic and…
We present a theoretical model for the evolution of mixture concentrations in a micro-pervaporation device, similar to those recently presented experimentally. The described device makes use of the pervaporation of water through a thin PDMS…
Polymer solutions subject to pressure driven flow and in nanoscale slit pores are systematically investigated using the dissipative particle dynamics approach. We investigated the effect of molecular weight, polymer concentration and flow…
We performed a thorough investigation of the drying dynamics of a charged colloidal dispersion drop in a confined geometry. We developed an original methodology based on Raman micro-spectroscopy to measure spatially-resolved colloids…
The method of formation of nanoparticle aggregates such as high-coverage spherical shells of microspheres or 3-D micro crystals grown in the geometry unaffected by a substrate is described. In the reported experiment, the evaporation of…
Drying of colloidal dispersion and their consolidation into a particulate deposit is a common phenomenon. This process involves various physical processes such as diffusion of liquid molecules into the ambient atmosphere and advection of…
We present an experimental micro-model of drying porous media, based on microfluidic cells made of arrays of pillars on a regular grid, and complement these experiments with a matching two-dimensional pore-network model of drying. Disorder,…
Experiments of water wicking in 1D silicon-dioxide nanochannels of heights 59 nm, 87 nm, 124 nm and 1015 nm are used to estimate the disjoining pressure of water which was found to be as high as ~1.5 MPa while exponentially decreasing with…
When a water droplet is deposited within a sparsely miscible liquid medium such as certain oils, the droplet surprisingly vanishes, even in a confined geometry. Such a phenomenon has crucial consequences for multiphase flows in which…
Charged colloidal dispersions make up the basis of a broad range of industrial and commercial products, from paints to coatings and additives in cosmetics. During drying, an initially liquid dispersion of such particles is slowly…