相关论文: A local intermittency based Reynolds-averaged tran…
This paper introduces a new robust formulation for local correlation-based laminar-to-turbulent transition models. This mechanism is incorporated into Reynolds-Averaged Navier-Stokes (RANS) equations, coupled with the Spalart-Allmaras (SA)…
In typical nature and engineering scenarios, such as supernova explosion and inertial confinement fusion, mixing flows induced by hydrodynamics interfacial instabilities are essentially compressible. Despite their significance, accurate…
Reynolds-averaged Navier-Stokes (RANS) equations are widely used in engineering turbulent flow simulations. However, RANS predictions may have large discrepancies due to the uncertainties in modeled Reynolds stresses. Recently, Wang et al.…
We present direct numerical simulations (DNSs) of bypass transition over a flat plate with inlet freestream turbulence intensity levels of 0.75%, 1.5%, 2.25%, 3.0%, and 6.0%, respectively. A new definition of the transition intermittency is…
Due to the thick boundary layers in hypersonic flows, the state of the boundary layer significantly influences the whole flow field as well as surface heat loads. Hence, for engineering applications the efficient numerical prediction of…
It has previously been shown that by increasing the Reynolds number across a channel by spatially varying the viscosity does not cause an immediate change in the size of turbulent structures and a delay is in fact observed in both wall…
The Reynolds-averaged Navier-Stokes (RANS) equations for steady-state assessment of incompressible turbulent flows remain the workhorse for practical computational fluid dynamics (CFD) applications. Consequently, improvements in speed or…
Reynolds-averaged Navier--Stokes (RANS) simulations with turbulence closure models continue to play important roles in industrial flow simulations. However, the commonly used linear eddy viscosity models are intrinsically unable to handle…
This work determines the inaccuracy of using Reynolds averaged Navier Stokes (RANS) turbulence models in transition to turbulent flow regimes by predicting the model-based discrepancies between RANS and large eddy simulation (LES) models…
Reynolds-Averaged Navier-Stokes (RANS) models are widely used for turbulent flow simulations due to their computational efficiency, but their accuracy strongly depends on the selected turbulence closure and may vary across the flow domain.…
Reynolds-averaged Navier-Stokes (RANS)-based transition modeling is widely used in aerospace applications but suffers inaccuracies due to the Boussinesq turbulent viscosity hypothesis. The eigenspace perturbation method can estimate the…
We present a machine learning-based framework for blending data-driven turbulent closures in the Reynolds-Averaged Navier-Stokes (RANS) equations, aimed at improving their generalizability across diverse flow regimes. Specialized models…
Despite their well-known limitations, Reynolds-Averaged Navier-Stokes (RANS) models are still the workhorse tools for turbulent flow simulations in today's engineering application. For many practical flows, the turbulence models are by far…
Turbulence modeling is a critical component in numerical simulations of industrial flows based on Reynolds-averaged Navier-Stokes (RANS) equations. However, after decades of efforts in the turbulence modeling community, universally…
A new model for the "rapid" part of the velocity/pressure-gradient correlation in the Reynolds averaged Navier-Stokes equations is suggested. It is shown that in an inhomogeneous incompressible turbulent flow, the model that is linear in…
This study aims to enhance the generalizability of Reynolds-averaged Navier-Stokes (RANS) turbulence models, which are crucial for engineering applications. Classic RANS turbulence models often struggle to predict separated flows…
Reynolds-Averaged Navier-Stokes(RANS) method will still play a vital role in the following several decade in aerospace engineering. Although RANS models are widely used, empiricism and large discrepancies between models reduce the…
Reynolds Averaged Navier Stokes (RANS) models represent the workhorse for studying turbulent flows in industrial applications. Such single-point turbulence models have limitations in accounting for the influence of the non-local physics and…
Fan-array wind generators (FAWGs) provide controlled turbulent inflow conditions that cannot be reproduced in conventional wind tunnels. Despite their increasing use in experimental studies, numerical modeling of FAWG-generated flows…
Hypersonic flow conditions pose exceptional challenges for Reynolds-Averaged Navier-Stokes (RANS) turbulence modeling. Critical phenomena include compressibility effects, shock/turbulent boundary layer interactions, turbulence-chemistry…