相关论文: Greener processing of SrFe$_{12}$O$_{19}$ ceramic …
The thermal remagnetization (TR), i.e. the reentrance of magnetization upon heating in a steady-field demagnetized sample, is a common feature to the four types of polycrystalline permanent magnets, mainly utilized for practical purposes,…
Multiscale simulation is a key research tool for the quest for new permanent magnets. Starting with first principles methods, a sequence of simulation methods can be applied to calculate the maximum possible coercive field and expected…
To optimize the processing conditions for the (Cr,Fe)S non-equilibrium phase with a pyrrhotite-type structure, the phase states and magnetic properties of the specimens obtained at various sintering temperatures were investigated. A…
We report the synthesis of Y-substituted Mg-Zn ferrites using conventional standard ceramic technique. XRD patterns confirm the single phase cubic spinel structure up to x = 0.03 and appearance of a secondary phase of YFeO3for higher Y…
Using thermodynamic measurements and density-functional band-structure calculations, we explore magnetic behavior of SrCuTe2O6. Despite being a structural sibling of a three-dimensional frustrated system PbCuTe2O6, this spin-1/2 quantum…
Microwave (MW) transmission, absorption, and reflection loss spectra of the ferrimagnetic U-type hexaferrite Sr$_4$CoZnFe$_{36}$O$_{60}$ ceramics were studied from 100 MHz to 35 GHz at temperatures between 10 and 390 K. 9 MW magnetic…
PbFe12O19 (PFO) powders in hexagonal structure have been synthesized by sol-gel process using lead acetate, glycerin and ferric acetylacetonate as the precursor. PbFe12O19 ceramics were obtained by sintering the PbFe12O19 powders at…
Systematic studies of magnetic properties of LaSr2Mn2O7 as a function of crystalline grain size provide information on how the crystalline grain size affects the magnetic and charge ordering in this compound. The half-doped bi-layered…
In this work we report a study of the magnetic behavior of ferrimagnetic oxide CoFe2O4 treated by mechanical milling with different grinding balls. The cobalt ferrite nanoparticles were prepared using a simple hydrothermal method and…
Precursor powders of BaMg2-xCoxFe16O27 with (x = 0.0, 1.0, and 2.0) were prepared using high-energy ball milling, and the effects of chemical composition and sintering temperature on the structural and magnetic properties were investigated…
Rare-earth-based permanent-magnet materials rich in iron have relatively low ferromagnetic ordering temperatures. This is believed to be due to the presence of antiferromagnetic exchange interactions, besides the ferromagnetic interactions…
ThMn12-type (Sm,Zr)1(Fe,Co,Ti)12 compounds show great potential for permanent magnets. Magnetically hard anisotropic powders prepared via reduction-diffusion exhibit a significant increase in coercivity from 0.45 T to 1.26 T as the…
Magnetic field of up to 12 T was applied during the sintering process of pure MgB2 and carbon nanotube (CNT) doped MgB2 wires. We have demonstrated that magnetic field processing results in grain refinement, homogeneity and significant…
In this paper we have investigated the effects of sintering time and temperature on the formation and critical current densities of Fe-clad MgB2 wires. MgB2 wires were fabricated using the powder-in-tube process and sintered for different…
Two-dimensional (2D) materials showing room-temperature magnetism and high coercivity are desired for combining magnetism with semiconducting properties useful for spintronics. In this work, the magnetic properties of the 1T phase of…
By using the arc-melting method, we successfully synthesized the compound Sc$_{0.5}$Zr$_{0.5}$Co with the space group of $Pm$-$3m$. Both the resistivity and magnetic susceptibility measurements reveal a phase transition at about 86 K. This…
Zirconia (ZrO2) has emerged as a promising technical ceramic, both as high temperature structural material and thermal barrier coating material, etc. The traditional synthesis of ZrO2 with spark plasma sintering (SPS) usually requires a…
We have studied the magnetization process of the new insulating ferromagnetic semiconductor (Al,Fe)Sb by means of x-ray magnetic circular dichroism. For an optimally doped sample with 10% Fe, a magnetization was found to rapidly increase at…
The microstructure and mechanical behavior of dual-phase steels are highly sensitive to the variation of the process (heat treatments). Online control by magnetic method is relevant. A measurement under applied stress must be considered.…
(Mn,Fe)2(P,Si) single crystals have been successfully grown by flux method. Single crystal diffraction demonstrates that Mn0.83Fe1.17P0.72Si0.28 crystallizes in a hexagonal crystal structure (space group P-62m) at both 100 and 280 K, in the…