相关论文: A mechanically-derived contact model for adhesive …
In Part I of this two part series, we presented a multi-neighbor dependent contact model for adhesive elastic-plastic particles built upon the method of dimensionality reduction that is valid for the elastic and fully-plastic contact…
In the present note, we suggest a simple closed form approximate solution to the adhesive contact problem under the so-called JKR regime. The derivation is based on generalizing the original JKR energetic derivation assuming calculation of…
An efficient method is presented for solving axisymmetric, frictionless contact problems between a rigid punch and an elastically non-homogeneous, power-law graded half-space. Provided that the contact area is simply-connected profiles of…
An improved linear model is developed for elasto-plastic and adhesive contact. New correlations are proposed and validated to estimate the key input parameters of the model, including contact stiffness, yield point, maximum pull-off force…
The detachment of material in an adhesive wear process is driven by a fracture mechanism which is controlled by a critical length-scale. Previous efforts in multi-asperity wear modeling have applied this microscopic process to rough elastic…
The interaction between visco-elasto-plastic and adhesive particles is the subject of this study, where "meso-particles" are introduced, i.e., simplified particles, whose contact mechanics is not taken into account in all details. A few…
This paper advances an analytical incremental contact model for the purely elastic or elastic-perfectly plastic Gaussian rough surfaces. The contact is modelled by the accumulation of identical circular contacts with radius given by the…
We introduce a contact law for the normal force generated between two contacting, elastically anisotropic bodies of arbitrary geometry. The only requirement is that their surfaces be smooth and frictionless. This anisotropic contact law is…
In this article, we extended our approach, that is mentioned in part 1, to model the indentation of an adhesive beam by a rigid cylindrical punch. We considered clamped and simply supported beams for this study. We first modeled these beams…
Application of the principle of energy balance to a rigid indenter in contact with elastic layer on a flat rigid substrate provides a very simple derivation of the detachment criterion which earlier has been obtained by much more…
The method of dimensionality reduction (MDR) is extended for the axisymmetric frictionless unilateral Hertz-type contact problem for a viscoelastic half-space and an arbitrary axisymmetric rigid indenter under the assumption that an…
Current engineering wear models are often based on empirical parameters rather than built upon physical considerations. Here, we look for a physical description of adhesive wear at the microscale, at which the interaction between two…
We investigate the contact of a rigid cylindrical punch with an adhesive beam mounted on flexible end supports. Adhesion is modeled through an adhesive zone model. The resulting Fredholm integral equation of the first kind is solved by a…
Recently, there has been some debate over the effect of adhesion on the contact of rough surfaces. Classical asperity theories predict, in agreement with experimental observations, that adhesion is always destroyed by roughness except if…
Adhesive [e.g. van der Waals] forces were not generally taken into account in contact mechanics until 1971, when Johnson, Kendall and Roberts (JKR) generalized Hertz' solution for an elastic sphere using an energetic argument which we now…
The force of adhesion of a rotationally symmetric indenter and an elastic half-space is analyzed analytically and numerically using an extension of the method of dimensionality reduction (MDR) for superimposed normal/tangential adhesive…
We study the mechanics of a reversible decohesion (unzipping) of an elastic layer subjected to quasi-static end-point loading. At the micro level the system is simulated by an elastic chain of particles interacting with a rigid foundation…
We study the relation between a threshold-force based model at the microscopic scale and mode I fracture at the macroscopic scale in a system of discrete interacting springs. Specifically, we idealize the contact between two surfaces as…
Engineering technologies frequently draw inspiration from nature, as exemplified in bio-inspired adhesive surfaces. These surfaces present textures adorned by pillars, mimicking the topography found on the pads of certain animals renowned…
We develop two new continuum contact models for coupled adhesion and friction, and discuss them in the context of existing models proposed in the literature. Our new models are able to describe sliding friction even under tensile normal…