相关论文: Cylindrical void growth vs. grain fragmentation in…
The crystal plasticity finite element method (CPFEM) is a widely used technique for resolving macroscopic stress and strain onto the physically relevant length scales of grains and slip systems in ductile crystalline materials like…
The present report describes a big data numerical study of crystal plasticity finite element (CPFE) modelling using static and grain-based meshing to investigate the dependence of the results on the discretization approach. Static mesh…
The effect of stress-triaxiality on growth of a void in a three dimensional single-crystal face-centered-cubic (FCC) lattice has been studied. Molecular dynamics (MD) simulations using an embedded-atom (EAM) potential for copper have been…
A study has been performed using a crystal plasticity based finite element method to understand the effect of various stress states and crystal orientations with respect to loading direction for FCC single crystals in both hydrogenated and…
To reduce reliance on experimental fitting data within the crystal plasticity finite element method (CPFEM), an approached is proposed that integrates first-principles calculations based on density functional theory (DFT) to predict the…
Combined high-energy X-ray diffraction microscopy (HEDM) and crystal plasticity finite element (CPFE) modeling studies have emerged as a preferred paradigm to shed insight into the evolution of elasticity and plasticity at the intragrain…
Rapid solidification experiments on thin film aluminum samples reveal the presence of lattice orientation gradients within crystallizing grains. To study this phenomenon, a single-component phase-field crystal (PFC) model that captures the…
Voids are one of the many material defects present at the microscopic length scale. They are primarily responsible for the formation of cracks and hence contribute to ductile fracture. Circular voids tend to deform into elliptical voids…
Voids can be observed at various scales in ductile materials, frequently of sizes lower than the grain size, leading to porous single crystals materials. Two local deformation modes of porous ductile (single crystals) materials have been…
The mechanisms of void growth and coalescence are key contributors to the ductile failure of crystalline materials. At the grain scale, single crystal plastic anisotropy induces large strain localization leading to complex shape evolutions.…
Ductile fracture has been extensively studied in metals with weak mechanical anisotropy such as copper and aluminum. The fracture of more anisotropic metals, especially those with a hexagonal crystal structure (e.g. titanium), remains far…
The combination of Finite Element Method (FEM) simulation and experimental photo-elasticity provides both qualitative and quantitative information about the stress field in a polymer composite and particularly along the fibre-matrix…
The effect of grain size on the flow stress of FCC polycrystals is analyzed by means of a multiscale strategy based on computational homogenization of the polycrystal aggregate. The mechanical behavior of each crystal is given by a…
In this paper, we propose an implicit staggered algorithm for crystal plasticity finite element method (CPFEM) which makes use of dynamic relaxation at the constitutive integration level. An uncoupled version of the constitutive system…
We address a three-dimensional, coarse-grained description of dislocation networks at grain boundaries between rotated crystals. The so-called amplitude expansion of the phase-field crystal model is exploited with the aid of finite element…
We introduce a dislocation density tensor and derive its kinematic evolution law from a phase field description of crystal deformations in three dimensions. The phase field crystal (PFC) model is used to define the lattice distortion,…
The onset of nonlinear effects in metals, such as plasticity and damage, is strongly influenced by the heterogeneous stress distribution at the grain level. This work is devoted to studying the local stress distribution of shear stresses…
Residual stress and plastic strain in additive manufactured materials can exhibit significant microscopic variation at the powder scale, profoundly influencing the overall properties of printed components. This variation depends on…
Polycrystalline hcp metals - an important class of engineering materials - typically exhibit complex plasticity because of a limited number of slip systems. Among these metals, deformation is even more complicated in cobalt as it commonly…
The origin of cube recrystallization texture in medium to high stacking-fault energy fcc metals has been debated for almost 70 years. Despite numerous experimental and simulation studies, many issues regarding the nucleation and growth of…