相关论文: Interaction of $\langle a \rangle$ prismatic screw…
Plasticity in hexagonal close packed (HCP) metals and alloys such as Titanium (Ti) and Zirconium (Zr) is carried out by the motion of $\langle a \rangle$ dislocations. Above room temperature, in situ transmission electron microscopy…
Dislocation interactions at the crack nucleation site were investigated in near-alpha titanium alloy Ti-6242Si subjected to low cycle fatigue. Cyclic plastic strain in the alloy resulted in dislocation pile-ups in the primary alpha grains,…
Ti exhibits complex plastic deformation controlled by active dislocation and twinning systems. Understandings on dislocation cores and twin interfaces are currently not complete or quantitative, despite extensive experimental and simulation…
A multiscale approach based on molecular dynamics (MD) and kinetic Monte Carlo (kMC) methods is developed to simulate the dynamics of an $\langle \mathbf{a} \rangle$ screw dislocation in $\alpha$-Ti. The free energy barriers for the core…
Low-angle grain boundaries (LAGBs) are often regarded as penetrable interfaces to dislocation motion, yet recent studies suggest they can also act as strong barriers. The origin of this duality remains debated, particularly regarding the…
The $\alpha/\beta$ interface is central to the microstructure and mechanical properties of titanium alloys. We investigate the structure, thermodynamics and migration of the coherent and semicoherent Ti $\alpha/\beta$ interfaces as a…
The mechanisms of dislocation/precipitate interaction were studied by means of discrete dislocation dynamics within a multiscale approach. Simulations were carried out using the discrete continuous method in combination with a fast Fourier…
Understanding the mechanism of martensitic transformation is of great importance in developing advanced high strength steels, especially TRansformation-Induced Plasticity (TRIP) steels. The TRIP effect leads to enhanced work-hardening rate,…
We employ density-functional-theory calculations to analyze the interactions between oxygen interstitial atoms and <a>-type screw dislocations (<a> = a<11-20>/3 ) in alpha-titanium, based on investigations of generalized stacking fault…
The high lattice mismatched SiC/Si(001) interface was investigated by means of combined classical and ab initio molecular dynamics. Among the several configurations analyzed, a dislocation network pinned at the interface was found to be the…
The interaction of C atoms with a screw and an edge dislocation is modelled at an atomic scale using an empirical Fe-C interatomic potential based on the Embedded Atom Method (EAM) and molecular statics simulations. Results of atomic…
The alpha/beta interface in Ti-6Al-2Sn-4Zr-6Mo (Ti-6246) is investigated via centre of symmetry analysis, both as-grown and after 10% cold work. Semi-coherent interface steps are observed at a spacing of 4.5 +/-1.13 atoms in the as-grown…
The presence of interfaces and grain boundaries significantly impacts the mechanical properties of materials, particularly when dealing with micro- or nano-scale samples. Distinct interactions between dislocations and grain boundaries can…
Dislocation-interface interactions dictate the mechanical properties of polycrystalline materials through dislocation absorption, emission and reflection and interface sliding. We derive a mesoscale interface boundary condition to describe…
The mechanical behaviour of Mg-Al alloys can be largely improved by the formation of an intermetallic Laves phase skeleton, in particular the creep strength. Recent nanomechanical studies revealed plasticity by dislocation glide in the…
Understanding crack tip - dislocation interaction is critical for improving the fracture resistance of semi-brittle materials like room-temperature plastically deformable ceramics. Here, we use a modified double cleavage drilled compression…
The effect of slip transfer on the deformation mechanisms of Al bicrystals was explored using a rate-dependent dislocation-based crystal plasticity model. Three different types of grain boundaries (GBs) were included in the model by…
Slip intermittency and stress oscillations in titanium alloy Ti-7Al-O that were observed using in-situ far-field high energy X-ray diffraction microscopy (ff-HEDM) are investigated using a discrete dislocation plasticity (DDP) model. The…
For potentially wider applications of ceramics with dislocation-tuned mechanical and functional properties, it is pertinent to achieve dislocation engineering in polycrystalline ceramics. However, grain boundaries (GBs) in general are…
Slip transfer and blocking across grain boundaries was studied in a Ti foil with a strong rolling texture deformed in tension. Prior to deformation, the shape of the grains and the orientation of the grain boundaries were quantified through…