相关论文: Microstructure evolution and mechanical behavior o…
The effects of ageing at 800 $^\circ$C on the properties of the IRIS alloy (Ti$_{49.9}$Al$_{48}$W$_2$B$_{0.1}$) are studied. The initial microstructure of this alloy densified by Spark Plasma Sintering (SPS) is mainly composed of lamellar…
Ni-Mn-based metamagnetic shape-memory alloys exhibit a giant thermal response to magnetic fields and uniaxial stress which can be utilized in single caloric or multicaloric cooling concepts for energy-efficient and sustainable…
The elasto-plastic material behavior, material strength and failure modes of metals fabricated by additive manufacturing technologies are significantly determined by the underlying process-specific microstructure evolution. In this work a…
Microsegregation-free microstructures can form by solidifying at velocities beyond the absolute stability limit ($V_{\text{abs}}$), where solute partitioning is suppressed by a stable, planar solid-liquid interface. Producing such…
Bioresorbable Mg-based alloys with low density, low elastic modulus, and excellent biocompatibility are outstanding candidates for temporary orthopedic implants. Coincidentally, metal additive manufacturing (AM) is disrupting the biomedical…
Homogeneous face-centered cubic (fcc) polycrystalline CoCrFeNi films were deposited at room temperature on (0001)alpha-Al2O3 (c-sapphire). Phase and morphological stability of 200 to 670 nm thick films were investigated between 973 K and…
Thick-section plates made from a recently developed Al-Cu-Mg-Li alloy have been evaluated to understand the influence of microstructure on the anisotropy of tensile strengths after natural and artificial ageing treatment. Pancake-shaped…
A novel medium manganese steel named Novalloy with composition Fe-8.3Mn-3.8Al-1.8Si-0.5C-0.06V-0.05Sn was developed and thermomechanically processed through hot rolling and intercritical annealing. The steel possessed a yield strength of 1…
The evolution of the nuclear and magnetic structures of TlFe$_{1.6}$Se$_2$ was determined in the temperature range of 5-450\,K using single crystal neutron diffraction. The Fe layers in these materials develop a corrugation in the…
In the present work, experimental study has been carried out to expose the thermal, mechanical, and microstructural properties of low carbon steel as well as to inspects the influence of etchant concentration and etching time on its…
The mechanical behavior of a Mo-TiC30 vol.% ceramic-metal composite was investigated over a large temperature range (25^{\circ}C to 700^{\circ}C). High-energy X-ray tomography was used to reveal the percolation of the hard titanium carbide…
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu…
Zinc alloys have emerged as promising candidates for biodegradable materials due to their remarkable biocompatibility and favorable mechanical characteristics. The incorporation of alloying elements plays an essential role in advancing the…
The phenomenon of aging in soft matter systems is an intriguing and interesting. In his study we investigate the microstructure and aging dynamics of fluorescent nanoclay gels formed from the mixture of small (~25) and large (~250) aspect…
The low temperature autoclave aging behavior of zirconia toughened alumina composites processed by a classical powder mixing processing route was analyzed using atomic force microscopy (AFM), scanning electron microscopy and X-Ray…
This work focuses on the effect of soaking time on the microstructure during ultrafast heat treatment of a 50% cold rolled low carbon steel with initial ferritic-pearlitic microstructure. Dilatometry analysis was used to estimate the effect…
During the last years, the scientific and industrial community has focused on the astonishing properties of Fe-Mn-Al-C steels. These high advanced steels allow high-density reductions about ~15% lighter than conventional steels, high…
The effect of composition on microstructure both at the length scale of the secondary dendrite arm spacing and nano-sized dispersoids during homogenization of Al-Zn-Cu-Mg-Zr alloys has been studied. A comprehensive model that can predict…
Twenty-one distinct AlxCoCrFeNi alloys were rapidly prepared by laser alloying an equiatomic CoCrFeNi substrate with Al powder to create an alloy library ranging x=0.15-1.32. Variations in crystal structure, microstructure and mechanical…
The temporal evolution of ordered gamma prime (L12)-precipitates precipitating in a disordered gamma(f.c.c.) matrix is studied in extensive detail for a Ni-12.5 Al at.% alloy aged at 823 K (550 oC), for times ranging from 0.08 to 4096 h.…