相关论文: Three-dimensional morphology of an ultrafine Al-Si…
Laser surface remelting of as-cast Al-Ge eutectic alloy is shown to produce ultrafine lamellar eutectic morphology with interlamellar spacing refined up to ~60 nm and composed of FCC Al solid solution and unusual AlxGey intermetallic phases…
Nano-scale eutectics, such as rapid solidified Al-Si, exhibit enhanced yield strength and strain hardening but plasticity is limited by cracking of the hard phase (Si). Mechanisms that may suppress cracking and enable plastic co-deformation…
We investigate the irregular eutectic growth dynamics of the Al-Al3Ni alloy, in which one of the solid phases (Al3Ni) grows faceted from the liquid. Leveraging in situ optical microscopy and synchrotron transmission x-ray microscopy, we…
Twenty-one distinct AlxCoCrFeNi alloys were rapidly prepared by laser alloying an equiatomic CoCrFeNi substrate with Al powder to create an alloy library ranging x=0.15-1.32. Variations in crystal structure, microstructure and mechanical…
We use three-dimensional phase-field simulations to investigate the dynamics of the two-phase composite patterns formed upon during solidification of eutectic alloys. Besides the spatially periodic lamellar and rod patterns that have been…
We investigate solidification of an Al-Al2Cu as a model system to understand the emergence of patterns (such as lamellar, rod and maze-like) within eutectic colonies. To uncover the morphological transitions in-situ and in 3D, we introduce…
The effect of ultrasonic melting processing on three-dimensional architecture of intermetallic phases and pores in two multicomponent cast Al-5.0Cu-0.6Mn-0.5 Fe alloys is characterized using conventional microscopy and synchrotron X-ray…
We investigate lamellar three-phase patterns that form during the directional solidification of ternary eutectic alloys in thin samples. A distinctive feature of this system is that many different geometric arrangements of the three phases…
Solidification control is crucial in manufacturing technologies, as it determines the microstructure and, consequently, the performance of the final product. Investigating the mechanisms occurring during the early stages of nucleation…
Solidification is an important process in many alloy processing routes. The solidified microstructure of alloys is usually made up of dendrites, eutectics or a combination of both. The evolving morphologies are largely determined by the…
Macroporous silicon is widely employed in sensing and optoelectronic applications due to its large internal surface area and adjustable pore structure. However, quantitative correlations between morphology and functionality require…
Predicting the microstructure during selective laser sintering (SLS) is of great interests, which can compliment the current time and cost expensive trial-and-error principle with an efficient computational design tool. However, it still…
The bottleneck of alloy design for powder-based additive manufacturing (AM) resides in customized powder production - an expensive and time-consuming process hindering the rapid closed-loop design iterations. This study analyzed an…
Industrial use of ultrashort-pulse surface structuring would significantly increase by an effective utilization of the average laser powers available currently. However, the unexplained degradation of surfaces processed with numerous pulses…
Epitaxial Al/GaAs/Al structures having controlled thickness of high-quality GaAs and pristine interfaces have been fabricated using a wafer-bonding technique. III-V semiconductor/Al structures are grown by molecular beam epitaxy on III-V…
In the present study, superheating treatment has been applied on A357 reinforced with 0.5 wt. % (Composite 1) and 1.0 wt.% (Composite 2) continuous stainless steel composite. In Composite 1 the microstructure displayed poor bonding between…
The electronic structures of epitaxially grown films of Ti3AlC2, Ti3SiC2 and Ti3GeC2 have been investigated by bulk-sensitive soft X-ray emission spectroscopy. The measured high-resolution Ti L, C K, Al L, Si L and Ge M emission spectra are…
The simulations of the solidification of ternary Al-Cu-Ni alloys by means of a general multi-phase-field model for an arbitrary number of phases reveal that the real microstructure can be generated by coupling the real thermodynamic…
Selective laser melting (SLM) is rapidly evolving to become a mainstream technology. However, the fundamental mechanisms of solidification and microstructure development inherent to the non-equilibrium conditions of this additive…
We demonstrate the first optically pumped sub-300 nm UV laser structures grown by plasma-assisted molecular beam epitaxy on single-crystal bulk AlN. The edge-emitting laser structures fabricated with the AlN/AlGaN heterostructures exhibit…