相关论文: Orientation relationship of FeNiC and FeNiCSi from…

The spatial variation in martensite tetragonality (c/a ratio) in Fe-0.77C (wt.%) alloy was investigated by means of pattern matching of electron backscatter diffraction patterns combined with high angular resolution electron backscatter…

Scanning nano-beam electron diffraction with a pixelated detector was employed to investigate the orientation relationship of nanometer sized, irradiation induced G-phase (M$_6$Ni$_{16}$Si$_{7}$) precipitates in an austenite matrix. Using…

In this paper, we present temperature and field dependent neutron diffraction (ND) study to unravel the structural and the magnetic properties in Ni50Mn38Sb12 Heusler system. This alloy shows martensitic transition from high temperature…

Orientation determination does not necessarily require complete knowledge of the local atomic arrangement in a material. We present a method for microstructural phase discrimination and orientation analysis of phases for which there is only…

The forward transformation from face centered cubic austenite to body centered cubic/tetragonal martensite in ferrous alloys can significantly in- fluence the microstructure and mechanical properties of the material. Inferring possible high…

In this paper we introduce a 3D phenomenological model for shape memory behavior, accounting for: martensite reorientation, asymmetric response of the material to tension/compression, different kinetics between forward and reverse phase…

Electron Backscattering Diffraction (EBSD) provides important information to discriminate phase transformation products in steels. This task is conventionally performed by an expert, who carries a high degree of subjectivity and requires…

In the present work, the aspects of magnetic and structural properties of Ni-Mn-Ga alloys are described in the framework of fist-principles approach and mapped into ternary composition diagrams. The stable atomic arrangement and magnetic…

In the present paper, we have studied atomic structure of nitrogenous austenite. High precision ab-initio calculation was utilized for the calculation of the pair potentials of interatomic interactions N-N in FCC Fe lattice. These…

The microstructure of a CoNiAl FSMA was determined by conventional transmission electron microscopy, electron diffraction studies together with advanced microscopy techniques and in-situ Lorentz microscopy. 10 to 60 nm sized rod-like…

Measurements of the local tetragonality in Fe-C martensite at microstructural length-scale through pattern matching of electron backscatter diffraction patterns (EBSPs) and careful calibration of detector geometry are presented. It is found…

Precise and accurate determination of crystallographic orientation is crucial for engineering van der Waals heterostructures, where the twist angle between layers controls emergent electronic and optical properties. While Electron…

We report an improved reversibility of magnetostriction and inverse magnetocaloric effect (MCE) for the magnetic shape-memory Heusler alloy Ni$_{1.8}$Mn$_{1.8}$In$_{0.4}$. We show that the magnetostriction and MCE crucially depends on the…

Using first-principles calculations based on density functional theory, we have studied the mechanical, electronic, and magnetic properties of Heusler alloys, namely, Ni$_{2}BC$ and Co$_{2}BC$ ($B$ = Sc, Ti, V, Cr and Mn as well as Y, Zr,…

Partitioning at phase boundaries of complex steels is important for their properties. We present atom probe tomography results across martensite / austenite interfaces in a precipitation-hardened maraging TRIP steel (12.2 Mn, 1.9 Ni, 0.6…

We present a unifying description for the martensitic transformation of steel that accounts for important experimentally observable features of the transformation namely, the Neumann bands, the interfacial (habit) plane between the…

The locally varying tetragonality in martensite grains of a high-carbon steel (1.2 mass percent C) was resolved by electron backscatter diffraction (EBSD) with a spatial resolution in the order of 100nm. Compared to spatially integrating…

The large magnetocaloric effect (MCE) observed in Ni-Mn based shape-memory Heusler alloys put them forward to use in magnetic refrigeration technology. It is associated with a first-order magnetostructural (martensitic) phase transition. We…

We present a few recent developments in the field of electron backscatter diffraction (EBSD). We highlight how open source algorithms and open data formats can be used to rapidly to develop microstructural insight of materials. We include…

Bragg coherent X-ray diffraction imaging (BCDI) allows the three-dimensional (3D) measurement of lattice strain along the scattering vector for specific microcrystals. If at least three linearly independent reflections are measured, the 3D…