相关论文: Exposure Assessment for Wearable Patch Antenna Arr…
With an increase in the application of ultra-wideband (UWB) electromagnetic pulses in the communications industry, radar, biotechnology and medicine, comes an interest in UWB exposure safety standards. Despite an increase of the scientific…
Emerging colloidal quantum dot (cQD) photodetectors currently challenge established state-of-the-art infrared photodetectors in response speed, spectral tunability, simplicity of solution processable fabrication, and integration onto curved…
Focusing metasurfaces (MTSs) tailored for different power allocations in wireless power transfer (WPT) system are proposed in this letter. The designed metasurface unit cells ensure that the phase shift can cover over a 2{\pi} span with…
One way to reduce the lattice thermal conductivity of solids is to induce additional phonon surface scattering through nanostructures. However, how phonons interact with boundaries, especially at the atomic level, is not well understood. In…
The high attenuation of millimeter-wave (mmWave) would significantly reduce the coverage areas, and hence it is critical to study the propagation characteristics of mmWave in multiple deployment scenarios. In this work, we investigated the…
Energy of propagating electromagnetic waves can be fully absorbed in a thin lossy layer, but only in a narrow frequency band, as follows from the causality principle. On the other hand, it appears that there are no fundamental limitations…
Waves scattered by a weakly inhomogeneous random medium contain a predominant single scattering contribution as well as a multiple scattering contribution which is usually neglected, especially for imaging purposes. A method based on random…
We develop a multi-port-backscatter-modulation technique to determine, over the air (OTA), the scattering parameters of a linear, passive, time-invariant multi-port device under test (DUT). A set of "not-directly-accessible" (NDA) antennas…
In this article we present the biological effect of antenna topology on a users body. At different values of exposed frequency, the absorbent nature varies in human body. One of the major factors to be taken into consideration for designing…
We discuss regular particle arrays as nanostructured front layers for 3rd generation photovoltaic devices. A rigorous plane-wave method is used to investigate multi-type particle layers combining different radii and configurations. The…
The millimeter wave (mmWave) bands are likely to play a significant role in next generation cellular systems due to the possibility of very high throughput thanks to the availability of massive bandwidth and high-dimensional antennas.…
Plasmonic devices, fundamental to modern nanophotonics, exploit resonant interactions between light and free electrons in metals to achieve enhanced light trapping and electromagnetic field confinement. However, modeling their complex,…
With millimeter wave wireless communications, the resulting radiation reflects on most visible objects, creating rich multipath environments, namely in urban scenarios. The radiation captured by a listening device is thus shaped by the…
The objective of the Enhanced Mobile Broadband use case in 5G networks is to deliver high capacity access to densely populated areas, like city centres, transportation hubs or convention centres. Millimetre-wave communications are the go-to…
Quantum cascade detectors (QCD) are unipolar infrared devices where the transport of the photo excited carriers takes place through confined electronic states, without an applied bias. In this photovoltaic mode, the detector's noise is not…
We propose using THz frequency selective surfaces interrogated with THz subwavelength optical fibers as sensors for monitoring of the optical properties of thick films that are brought in contact with such surfaces. Changes in the test film…
Metasurface based super absorbers exhibit near unity absorbance. While the absorption peak can be tuned by the geometry/size of the sub-wavelength resonator, broadband absorption can be obtained by placing multiple resonators of various…
Millimeter-wave (mmWave) communication has been widely accepted as an enabler of 6G and other next-generation wireless networks, though high path loss strains link budgets, and difficult channel conditions have limited the deployment of…
The millimeter wave spectra at 71-76GHz (70GHz) and 81-86GHz (80GHz) have the potential to endow fifth-generation new radio (5G-NR) with mobile connectivity at gigabit rates. However, a pressing issue is the presence of incumbent systems in…
When planning a 5G network in the sub-6GHz bands, similar cell planning techniques to LTE can be applied. Looking at the Australian environment, the n78 band (3.3-3.8GHz TDD) is approximately 1GHz higher than the 2.6GHz band used in…